Important Consumer Notice

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”.

DANGER You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

I)INTRODUCTION

Thank you for purchasing this water heater. Properly installed and maintained, it will provide years of trouble free service. This manual gives instructions for the proper instal- lation, safe operation and maintenance of this water heater. It is your responsibility to ensure that your water heater is properly installed and cared for.

The warranty on this water heater is in effect only when the water heater is installed and operated in accordance with these instructions. The manufacturer of this water heater will not assume any liability for any injury or property dam- age resulting from failure to comply with these instructions. Protect your warranty: Regularly maintain your water heater as detailed in the service and maintenance section of this manual.

Installation Code Requirements

In addition to the installation instructions found in this man- ual, the water heater must be installed in accordance with all local and provincial or state codes or, in the absence of local and provincial or state codes, with the latest edition of “Canadian Electrical Code” (in Canada) available from:

Canadian Standards Association

5060 Spectrum Way,

Mississauga, Ontario, Canada

L4W 5N6

“National Electrical Code” (in USA) available from: American Standards Institute,

1430 Broadway, New York, NY 10018

The requirements of these documents must be carefully fol- lowed in all cases. Authorities having jurisdiction shall be consulted before installations are made. Check your phone

WARNING

THE ELECTRICAL SUPPLY TO THE WATER HEATER MUST BE TURNED OFF WHEN WORKING ON, OR NEAR, THE ELECTRICAL SYSTEM OF THE HEATER. NEVER TOUCH THE ELECTRICAL COMPONENTS WITH WET HANDS OR WHILE STANDING IN WATER. TO ENSURE CONTINUED SAFETY PROTECTION, REPLACE FUSES WITH SAME SIZE, TYPE AND RAT- ING ONLY.

listings for the local authorities having jurisdiction over your installation.

Important: All supply equipment, installation, approvals, permits, inspections, etc. are the responsibility of the owner of this water heater. Consult your local authorities for regu- lations specific to your area.

Refer to Figure 1 to identify the major components and the optional equipment installed on this water heater. Familiarize yourself with all the controls and components identified to help with checking the operation of this heater.

- 2 -

73992 specifications

GSW 73992, an innovative model in the world of advanced non-metallic materials, has garnered attention for its exceptional performance and unique characteristics. Engineered to meet the demanding needs of various industries such as aerospace, automotive, and construction, GSW 73992 stands out due to its remarkable properties and cutting-edge technologies.

One of the main features of GSW 73992 is its lightweight nature. Weighing significantly less than traditional metal counterparts, this material enables designers and engineers to reduce overall weight without compromising structural integrity. This attribute is particularly advantageous in the aerospace sector, where weight savings translate into improved fuel efficiency and enhanced performance.

The technology behind GSW 73992 is grounded in advanced composite engineering. Utilizing a combination of high-strength fibers and resins, GSW 73992 exhibits exceptional tensile strength and impact resistance. Its ability to withstand harsh environmental conditions, including extreme temperatures and moisture, makes it a preferred choice for applications requiring durability and reliability.

Another standout characteristic of GSW 73992 is its corrosion resistance. Unlike metals, which can succumb to rust and degradation over time, GSW 73992 maintains its integrity even in challenging environments. This property not only contributes to the longevity of products made from GSW 73992 but also reduces maintenance costs, making it an economical option for manufacturers.

GSW 73992 also boasts excellent thermal insulation properties. Its low thermal conductivity ensures minimal heat transfer, making it ideal for applications in building materials and automotive components where temperature regulation is crucial. This feature enhances energy efficiency and contributes to sustainability efforts by reducing the need for additional insulation materials.

Additionally, GSW 73992 offers design flexibility, allowing manufacturers to create complex shapes and forms that would be difficult to achieve with traditional metals. This adaptability opens up new possibilities in product design, enabling creative solutions that can cater to specific industry needs.

Overall, GSW 73992 represents a significant advancement in material science, combining lightweight construction, high strength, resistance to environmental stressors, and design versatility. Its array of features positions it as a game-changer for industries seeking to improve performance while adhering to modern sustainability standards. As the demand for innovative materials continues to grow, GSW 73992 is poised to play a pivotal role in shaping the future of engineering and manufacturing.