Flymo 2500 manual Guarantee & Guarantee Policy, Emptying the Debris Bag, Caring for your product

Page 7

Q1

Q2

Emptying the Debris Bag

Emptying the Debris Bag

 

 

1. Remove the Debris Bag as described in

 

 

 

the ‘Converting from Vacuum to Blower

 

 

 

use’ section.

 

￿

2. Empty debris bag as shown in Pic. Q1

 

 

DO NOT PLACE HANDS IN BAG WHEN EMPTY-

 

 

ING, SHARP DEBRIS CAN CAUSE INJURY (Q2)

 

￿ 3. Re-fit the Debris Bag as described in the

 

 

 

‘Vacuum Assembly’ section.

 

 

Caring for your product

S1

S2

WARNING Never use water for cleaning your

product, use only a dry cloth. Do not clean with

 

 

chemicals or solvents, some can destroy critical

 

 

plastic parts.

 

 

After Using Your Product

 

 

1.

Switch off and disconnect from the mains

 

 

2.

electricity supply before cleaning your product.

 

 

Always empty the debris bag.(R1)

 

 

3.

Inspect the fan for damage and replace if

 

 

 

necessary. Clean the fan with a soft brush

S3

S4

 

ensuring it is free from debris (S1)

4.

Clean the Debris/Blow Outlet with a soft

 

 

5.

brush.(S2)

 

 

Clean the air vents with a soft brush (S3)

 

 

6.

Wipe over the product with at dry cloth (S4).

 

 

Storing Your Product

 

 

Always store the product in a dry place ensuring the

 

 

cable is not likely to be damaged on sharp edges etc.

Fault Finding Hints

Fails To Operate

1.Is the power turned on?

2.Is the Blow Tube, Impeller Guard, Suction Tube or Debris bag fitted correctly?

3.Check the fuse in the plug, if blown replace.

4.Fuse continues to blow?

Immediately disconnect from the mains electricity supply and consult your local Approved Service Centre

Poor Blowing

1.The air inlets may be blocked, clean all air inlets.

2.Blow outlet may be blocked. Remove Blow Tube and clear blockage with blunt edge instrument

3.If poor blowing persists?

Immediately disconnect from the mains electricity supply and consult your local Approved Service Centre

Poor Vacuum

1.The air inlets may be blocked, clean all air inlets.

2.The Debris Bag inlet may be blocked. Remove Debris Bag and clear blockage with a blunt edge instrument.

3.If poor vacuuming persists?

Immediately disconnect from the mains electricity supply and consult your local Approved Service Centre

Excessive Vibration

1.Inspect the fan for damage and replace if necessary

2.If excessive vibration persists?

Immediately disconnect from the mains electricity supply and consult your local Approved Service Centre

Guarantee & Guarantee Policy

If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna UK Ltd, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing: (a)The fault is reported directly to the Authorised Repairer. (b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty adjustment by the user.

(d)The failure has not occurred through fair wear and tear. (e)The machine has not been serviced or repaired, taken apart or tampered with by any person not

authorised by Husqvarna UK Ltd.

(f) The machine has not been used for hire.

(g)The machine is owned by the original purchaser. (h)The machine has not been used commercially.

* This guarantee is additional to, and in no way diminishes the customers statutory rights.

Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine:

Failures not covered by guarantee

*Failures as a result of not reporting an initial fault.

*Failures as a result of sudden impact.

*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual.

*Machines used for hire are not covered by this guarantee.

*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Electric Mains cable, Debris Bag.

*Caution!

Husqvarna UK Ltd does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna UK Ltd, or by the machine having been modified in any way

Image 7
Contents Twister 2000/2500 Carton Contents SafetyPreparation Maintenance and storageMaximum rating Ensure the mains voltage suits your product 13 Amp fuse must be fitted to the Mains PlugAttach the Debris Bag to the unit as illustrated in Pic B Vacuum AssemblyConverting from Vacuum use to Blower use Cable Restraint How to UseUsing As a Blower Using As a VacuumCaring for your product Guarantee & Guarantee PolicyFault Finding Hints Emptying the Debris BagType Twister Service RecommendationsEC Declaration of Conformity Environmental Information
Related manuals
Manual 52 pages 32.48 Kb

2500 specifications

The Flymo 2500 and Flymo 2200 are reputable models in the world of lawn care, specifically designed to make mowing easier for homeowners with small to medium-sized gardens. These unique hover mowers are celebrated for their innovative designs and effective performance.

One of the standout features of both the Flymo 2500 and 2200 is their hover technology. Unlike traditional mowers, these models utilize air cushion technology, enabling them to float above the ground. This feature not only makes mowing effortless but also allows for greater maneuverability, especially around flower beds and garden ornaments. The lightweight construction of these mowers ensures that they can be easily guided, even by those who may find conventional push mowers cumbersome.

With a cutting width of 25 cm for the Flymo 2500 and 22 cm for the Flymo 2200, both models are efficient for trimming grass in tight spaces. This makes them ideal for suburban gardens, where intricate landscaping often requires precision. Both hoover mowers are equipped with a powerful electric motor that contributes to their high performance while remaining environmentally friendly.

In terms of cutting heights, the Flymo models offer a range of settings, allowing users to customize their lawn's appearance. The adjustable cutting height ensures that grass can be maintained at a length that suits each individual preference, promoting healthier growth and a well-kept garden.

The design of the Flymo 2500 and 2200 also emphasizes user comfort. The ergonomic handles provide a secure grip, reducing strain during operation. Additionally, the compact size allows for easy storage, making these mowers an excellent choice for those with limited garage or shed space.

Maintenance is made simple with these models, as they come equipped with easily accessible components for cleaning and blade replacement. The robust cutting blades are specifically designed to deliver a clean cut, promoting even growth and a polished look for the lawn.

In conclusion, the Flymo 2500 and 2200 hover mowers stand out for their unique hover technology, efficient cutting width, adjustable cutting heights, and user-friendly designs. Perfect for gardeners seeking to maintain the beauty of their outdoor spaces with minimal effort, these mowers are a testament to innovation in lawn care technology.