Operating Instructions

Fig. 16

WARNING: Always remove the power plug from the wall outlet before assembling or removing accessories.

Inserting The Handle Into The Main Unit

•Insert the handle into the hole on the top of the unit. Make sure that the slot in the handle fits correctly into the opening. (Fig. 1)

•To remove the handle, press the handle release button and pull the handle up.

Release Button

Fig. 1

Attaching The Motorized Floor Brush To The Main Unit

•	Insert the motorized floor brush into its
	location at the bottom of the main unit,
	in the direction of the arrow. (Fig. 2)
•	Make sure that the motorized floor
	brush is firmly inserted into the floor

Attaching The Hose To The Main Unit

•Hold the end of the removable hose handle and insert it into the hose connector. (Fig. 3).

Hose

Connector

Fig. 3

Inlet

Hose

Motorized

Floor Brush

Hose Connector

Winding & Unwinding The Power Cord

Cleaning the Filter Ring

1.Around the HEPA filter there is a filter ring. This is washable in lukewarm water.

(Fig. 16) To remove the filter ring, slide it off the HEPA filter.

2.We recommend washing the filter ring

when you are washing your HEPA filter. Always allow the

filter ring to air dry for 24 hours before replacing onto the HEPA filter. Never run the vacuum without all the filters in place.

Changing & Cleaning the Exhaust Filter

The exhaust filter is a rinseable filter but should be replaced every three (3) months.

• To remove the exhaust filter covers,

push the exhaust filter covers up.

Remove the filter. (Fig. 17)

• Rinse the exhaust filters in lukewarm

water and air dry the filters completely

for 24 hours. Do not use a washing

machine to rinse the filters. Do not use

a hair dryer to dry them. Air dry only.

Never operate the vacuum without the

exhaust filters in place.

Motor Thermostat

IMPORTANT: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•Push the On/Off button once.

•Disconnect the plug from the power source.

•Check the source of overheating problem. (i.e. clogged hose or filter)

•If clogged hose or filter is found, unclog the hose and replace the filters.

•Wait at least 45 minutes before attempting to reuse the vacuum.

•After unit has cooled down for

45 minutes, plug in the cleaner and push the On/Off button. The vacuum should start again.

•If the vacuum still does not start, contact customer service at

1 (800) 275-9251.

brush socket.

• Insert the inlet hose into the floor brush

hose connector that is on the floor

brush. (Fig. 3)

Motorized Floor

Brush ReleaseMotorized Floor

Brush Hose

Connector

Fig. 2

This vacuum cleaner is equipped with a convenient cord storage feature. The power cord winds around the two cord holders at the back of the unit. The top one has a quick

cord release feature. Turn the cord hook to the left or the right to remove the power cord. (Fig. 4)

When using the vacuum, attach the power cord to the cord holder so that the power cord is out of the way when you

are vacuuming. (Fig. 5)

Fig. 5

Fig. 4

Cord holder

• When the filters are

dry, replace into

the exhaust filter

covers and replace

on the vacuum.

• Severely soiled or

clogged filters should

be thoroughly rinsed with

fresh tepid water. A mild

detergent can be used

if required.

Exhaust

Filter

Cover

Fig. 17

FM625H specifications

The Fantom Vacuum FM625H is a powerful and versatile cleaning solution designed to tackle a wide range of household tasks. Equipped with a robust motor, this vacuum cleaner delivers impressive suction power, making it effective on various surfaces, including carpets, hardwood floors, and upholstery. The FM625H is particularly lauded for its ability to lift stubborn dirt and debris, ensuring a thorough clean with minimal effort.

One of the standout features of the FM625H is its cyclonic filtration technology. This advanced system separates dirt and dust from the air, preventing clogging and maintaining consistent suction performance. The cyclonic design enhances the vacuum's efficiency, allowing for longer cleaning sessions without the need for frequent maintenance. Additionally, the vacuum is equipped with a HEPA filter, which captures allergens and fine particles, making it an excellent choice for allergy sufferers and those seeking a healthier living environment.

The Fantom FM625H also boasts a bagless design, which eliminates the hassle of replacing vacuum bags. Instead, it utilizes a large dust container that can be easily emptied and cleaned, saving both time and money in the long run. This feature not only simplifies the cleaning process but also promotes eco-friendliness by reducing waste.

User convenience is further enhanced by the FM625H’s lightweight construction and ergonomic design. Weighing in at just under ten pounds, it is easy to maneuver around the house, making it accessible for individuals of all ages. The vacuum includes a range of attachments, including a crevice tool, dusting brush, and upholstery nozzle. These tools help users clean hard-to-reach areas and specialized surfaces with ease.

Moreover, the FM625H features a retractable cord, allowing for a tidy storage solution and eliminating the risk of tangles during use. The vacuum’s design also incorporates a swivel head for added agility, making it simple to navigate around furniture and other obstacles.

With its combination of powerful suction, innovative filtration technology, and user-friendly features, the Fantom Vacuum FM625H stands out as a reliable and effective cleaning companion for modern households. Whether you need to handle daily messes or deep-clean your space, the FM625H is engineered to meet your needs with efficiency and ease.