Fantom Vacuum FM741HR instruction manual Removing the Bottom Plate, Reattaching the Bottom Plate

Page 15

REPLACEMENT INSTRUCTIONS

REMOVING THE BOTTOM PLATE

Set the vacuum cleaner to the

1 parallel position and turn it over.			Pull here
1 parallel position and turn it over.
Slide the latch in the direction	Latch	Press	Press
2 of the arrow.
Remove the bottom plate by pulling
3 the tabs as illustrated.
			Bottom Plate

REATTACHING THE BOTTOM PLATE

Insert the projection on the bottom plate

1 into the groove on the nozzle housing and set the bottom plate in place.

Bottom Plate

Projection

Groove

2 Push the bottom plate as shown.

Press

Press

3 Slide the latch in the direction shown.

Latch

Turn the vacuum over and place in the

4 upright position.

14

Image 15

Contents FM741HR Read ALL Instructions Before Using this Vacuum Cleaner Important Safety InstructionsPage Frontrear Names of Each PartAttaching the handle Preparations Before USEWinding the Power Cord Releasing the Power CordInserting the Power Cord Plug Using the Vacuum Cleaner ON/OFF SwitchAdjusting the Handle RUG/FLOOR Toolsselector Edge CleaningReattached on the body Using the AttachmentsEmptying the Dust Compartment Power cord from the wall outlet before cleaningCleaning Utensil Cleaning the FiltersClearing Blockages and Cleaning the Agitator Assembly Replacing the Headlight Lamp Replacement InstructionsReplacing the Flat Belt Reattaching the Bottom Plate Removing the Bottom PlatePull the filter cover away from Replacing the FilterProblem Cause Remedy TroubleshootingONE 1 Year Limited Warranty