Fantom Vacuum FM732H Changing & Cleaning Pre-Motor Filter, Extending the Telescopic Tube

Page 5
Wash once a month or when suction appears reduced
Warning: Allow 24 hours for drying before replacing in unit.
Fig. A

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

7.Vigorously “TapClean” the HEPA Dust Cup Filter on a hard surface until no more dust is observed falling out from between the pleats of the filter. See illustration at right.

PLEASE NOTE: The white pleated filter material in the HEPA Dust Cup Filter will discolor over time -This is NORMAL and will NOT affect the performance of the filter. If the HEPA Dust Cup Filter

is properly "TapCleaned” after each use and suction does not return to 100%, then we suggest that the HEPA filter be “TapCleaned” vigorously until no more dust

can be removed, then rinsed under the faucet and allowed to air dry for 24 hours before refitting into the vacuum. (Fig. A) This should be done once a month or when suction appears to be reduced.

Important: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.

8.Reassemble the debris screen back onto the HEPA filter cartridge.

9.To replace the HEPA filter back into the dust cup container, hold the filter by the stem and insert it up into the dust cup container making sure that the top rim of the filter fits onto

the top of the dust cup container and twist it clockwise to lock in place.

Ensure that the filter assembly is completely seated inside the dust cup (container).

Important: Do NOT use the HEPA filter cartridge without the debris screen in place.

10.Re-install dust cup into the vacuum and re-attach hose.

Changing & Cleaning the

Pre-Motor Filter

The pre-motor filter is located underneath the dust cup container. This is a rinseable filter but should be replaced every six (6) months. Never operate the vacuum without ALL the filters in place.

Push the Power On/Off button to the "Off" position and disconnect the power cord from the wall outlet.

Remove the dust cup container.

Remove the pre-motor filter and rinse in lukewarm water, let dry completely. Do not use a hair dryer to dry it. Air dry only.

When filter is completely dry, replace pre-motor filter back into the unit and replace the dust cup container.

Assembling Your Vacuum Cleaner

Note: Always remove the power plug from the wall outlet before assembling or removing accessories.

1.Attaching the Flexible Hose into the Vacuum

Connect the flexible hose into the air intake duct. Push in until you hear a “click”, indicating it is in its locked position.

To remove the flexible hose first remove the power nozzle power cord from the receptacle for the power nozzle power cord, then depress locking button and remove hose.

Connect the hose connecting power cord from the flexible hose to the power cord receptacle that is on the unit just below the air intake duct.

Air intake duct

Power cord receptacle

2.Fitting the Telescopic Tube to the Curved Wand / Hose Extension

Push the telescopic tube into the curved wand / hose extension, as shown in the illustration below.

Make sure that the telescopic tube locks in place.

3.Extending the Telescopic Tube

Push forward on the plastic button and pull the inner tube outward.

Plastic

Button

4.Fitting the Floor to Carpet Brush to the Telescopic Tube

Push the telescopic tube into the floor brush as show in the illustration below.

Telescopic

Tube

Floor to Carpet

Nozzle

Using Power Nozzle

1.Connecting the power nozzle with the telescopic tube:

A)Depress the button on the telescopic tube and insert it into the slot on the power nozzle elbow.

B)Push the telescopic tube down until you hear a "click".

(see illustration below).

Telescopic

Tube

Power

Nozzle

2.Insert the motorized brush power cord plug into the power socket on the flexible hose. To start motorized brush press the On/Off button that is located on the motorized brush.

7

4

Image 5
Contents Canister Vacuum with Motorized Power Head Model FM732H Important Safety InstructionsOrdering Replacement Dust CUP Filters Problem SolvingGetting to Know Your Canister Vacuum For Model FM732HOperating Instructions Changing & Cleaning the Post Motor FilterUsing Power Nozzle Changing & Cleaning Pre-Motor FilterExtending the Telescopic Tube Fitting the Floor to Carpet Brush to the Telescopic TubeRemoving & Cleaning Rinseable TapClean Hepa Dust Cup Filter Using your VacuumCrevice Tool and Dusting Brush Motor Thermostat

FM732H specifications

The Fantom Vacuum FM732H is a powerful and versatile cleaning solution designed for both residential and commercial use. Known for its robust performance and user-friendly features, this vacuum stands out in the crowded market of cleaning devices. With a strong emphasis on efficiency and technology, the FM732H makes vacuuming a hassle-free experience.

One of the main features of the FM732H is its powerful motor, which delivers impressive suction capabilities. This vacuum efficiently picks up dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and tiled areas. The adjustable suction settings allow users to tailor the power to their specific cleaning needs, ensuring optimal performance on different surfaces.

Another significant characteristic of the Fantom Vacuum FM732H is its lightweight design. Weighing in at just a fraction of traditional vacuum cleaners, it allows for easy maneuverability around the home or office. The ergonomic handle ensures a comfortable grip, making extended cleaning sessions less tiring. Additionally, the vacuum is designed with a compact profile that makes storage convenient, fitting easily into closets or tight spaces.

The FM732H also incorporates advanced filtration technologies. Equipped with a HEPA filter, it effectively traps allergens and fine particles, improving indoor air quality. This feature is particularly beneficial for allergy sufferers, as it reduces the amount of dust and dander in the environment. The filter is washable and reusable, reducing waste and saving on replacement costs.

The vacuum comes with a variety of attachments and accessories, enhancing its versatility. Included are tools such as a crevice tool for tight spaces, an upholstery brush for furniture, and a dusting brush for delicate surfaces. These accessories allow the FM732H to tackle a wide range of cleaning tasks, ensuring that no corner is left untouched.

In conclusion, the Fantom Vacuum FM732H is an excellent choice for anyone in need of a reliable and efficient cleaning device. With its powerful suction, lightweight design, advanced filtration system, and versatile attachments, it stands out as a top contender in the vacuum cleaner market. Whether for everyday household use or for more demanding commercial applications, the FM732H proves to be a valuable asset in maintaining cleanliness and hygiene.