Troubleshooting Guide, Limited Warranty | Essick Air FAD248, FAD242

Troubleshooting Guide

Problem	Possible Cause		Remedy
Failure to	1. No electrical power to	1. Check power
start or no	unit
air delivery	• Fuse blown	• Replace fuse
	• Circuit breaker	• Reset breaker
	tripped
	2. Belt too loose or tight	2.	Adjust belt tension
	3. Motor overheated	3. Determine cause of
			overheating
	• Belt too tight	• Adjust belt tension
	• Blower bearings dry	• Grease blower
			bearings
	4. Motor locked	4.	Replace motor

Inadequate	1. Insufficient air exhaust	1. Open windows or
air delivery			doors to increase air
with cooler			flow
running	2. Belt too loose	2.	Adjust belt tension
			or replace if needed
	3. Pads plugged	3.	Clean pads
	4. Insufficient water	4.	Clean distribution
	flow over pads		system

Motor	1. Low voltage	1. Check voltage
cycles on	2. Excessive belt tension	2.	Adjust belt tension
and off	3. Fan shaft tight or	3.	Grease or replace
	locked		bearings (Disconnect
			unit)
	4. Bearings dry	4. Grease bearings
	5. Faulty motor	5.	Replace motor

Problem	Possible Cause	Remedy
Musty or	1. Stale or stagnate water	1. Drain pan and clean
unpleasant	in cooler	pads
odor	2. Pads not wetting	2. Check water
	properly	distribution system
	• Dist. tube holes	• Clean
	clogged
	• Pump not working	• Replace or clean
	properly	pump (Unplug)
	• Insufficient water	• Clean water
	flow over pads	distribution system

Noisy	1. Bearings dry	1. Grease bearings
	2. Loose parts	2. Tighten loose parts

Inadequate	1. Inadequate exhaust in	1. Open windows or
cooling	building	doors to increase air
		flow
	2. Pads not wet	2. Check water
		distribution system
	• Pads plugged	• Clean pads
	• Dist. tube holes	• Clean
	clogged
	• Pump not working	• Replace or clean
	properly	pump (Unplug)

Excessive	1. Inadequate exhaust	1. Open doors or
humidity		windows
in building

Limited Warranty

This warranty is extended to the original purchaser of an evaporative cooler installed and used under normal conditions. It does not cover damages incurred through accident, neglect, or abuse by the owner. We do not authorize any person or representative to assume for us any other or different liability in connection with this product.

Terms And Conditions Of Warranty

Lifetime Limited Coverage on water reservoir against any leakage due to defects in material. From date of purchase, if any original component part fails due to defect in material or factory workmanship only, we will provide the replacement part as follows:

One year on the cabinet components.

Two years on the evaporative media.

Exclusions From The Warranty

We are not responsible for any incidental or consequential damage resulting from any malfunction.

We are not responsible for any damage received from the use of water softeners, chemicals, descale material, plastic wrap, or if a motor of a higher horsepower than what is shown on the serial plate is used in the unit.

We are not responsible for the cost of service calls to diagnose cause of trouble, or labor charge to repair and/or replace parts.

How To Obtain Service Under This Warranty

Contact the Dealer where you purchased the evaporative cooler. If for any reason you are not satisfied with the response from the dealer, contact the Customer Service Department: 5800 Murray Street, Little Rock, Arkansas 72209. 1-800-643-8341. E-mail: info@championcooler.com, Web: www.championcooler.com.

This limited warranty applies to original purchaser only

110497

FAD242, FAD248 specifications

Essick Air's FAD248 and FAD242 evaporative coolers are engineered to enhance indoor comfort and air quality, making them popular choices for residential and commercial spaces. Both models utilize a natural and energy-efficient cooling process, providing a refreshing respite from heat during the warmer months.

The FAD248 model is noted for its significant cooling capacity, making it suitable for medium to large-sized rooms. It features a powerful motor that delivers a high air output, ensuring that even the hottest spaces can maintain a comfortable temperature. On the other hand, the FAD242 is designed for slightly smaller areas, providing ample cooling with a slightly lower output while maintaining energy efficiency.

Both models employ advanced evaporative cooling technology that operates by drawing warm air through water-saturated pads. As the air passes through these pads, moisture evaporates, consequently lowering the air temperature. This process not only cools the air but also adds beneficial humidity, which can alleviate dryness and improve respiratory comfort.

The construction of the FAD248 and FAD242 includes durable, high-quality materials designed to withstand the rigors of continuous use. The exterior housing is typically constructed from robust plastics that are resistant to wear and tear, ensuring longevity. Furthermore, both coolers are equipped with large water reservoirs, allowing for extended periods of operation without the need for constant refilling.

In terms of usability, the FAD248 and FAD242 incorporate user-friendly controls that allow for easy adjustments to fan speed, cooling settings, and oscillation options, providing users with the flexibility to customize their cooling experience. Many models include a remote control feature for added convenience, allowing users to operate the unit from a distance.

Energy efficiency is a key highlight of both the FAD248 and FAD242, designed with efficiency in mind to minimize electricity consumption. This means users can enjoy cooler indoor environments without incurring high energy costs, making these coolers an environmentally friendly choice.

In summary, the Essick Air FAD248 and FAD242 evaporative coolers are practical solutions for effective and energy-efficient cooling. With user-centered designs, durable construction, and advanced evaporative technologies, they contribute significantly to enhanced indoor air quality and comfort, catering to the needs of different room sizes while promoting an eco-friendly lifestyle.