Daewoo DWA-151CS, DWC-100C Placing Chassis, Insert Window Kit Frames to Top Guide and Lower Guide

Page 7
Screw (Type E)

• Step 4 - Placing Chassis

1.Insert narrow side of ‘Frame Guide Lower’ to rectangle holes located in bottom of chassis, and fasten it with Screw (Type E).

2.Insert Window Kit Frames to Top Guide and Lower Guide.

3.Fasten Shutter to side holes of Chassis with six Screws (Type E).

4.Place the chassis on the window sill and align it with Sill Bracket and sill with Lower Frame Guide and locate window sash to Top Frame Guide. (check the end of chassis for about 1/2 inches (12mm) distance below the level.)

5.Attach the Window seal B to Frame Guide Top.

6.Fasten Front Chassis Bracket to sill with three Screws (Type C).

7.Fasten Sash Bracket with Screw (Type C) to top of indoor window sash or directly into side of window sash or directly into side of window frame. This will prevent raising of the window from the outside. If you have a hard wood or metal window frame, a 1/8 inch pilot hole may be needed in order to drive the screws.

8.Attach the Window Seal A to window (see the picture shown in step 8, page 8)

FRAME Screw (Type E, both side) Guide Lower

Frame Guide Top

Window Seal B

Screw

(Type C)

SASH BRACKET

Screw (Type C)

• Step 5 - Secure Window Shutter

CAUTION Do not drill into window sash until window has been inspected to make sure drilling or screw will not damage any locking or lifting mechanism located in the frame.

To provide a proper seal, pull each expandable side Window Shutter out and up until it is tight against the window frame. Using the hole in the top and bottom of each Window Kit Frame as a guide, secure Window Kit Frame in window sash and on the window sill.

WINDOW

KIT FRAME

 

Screw (Type C)

WINDOW

WINDOW

SASH

SHUTTER

 

WINDOW

FRAME

Screw

(Type C)

INNER WINDOW SILL

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Precautions for Proper USE of AIR Conditioner Table of Contents General SpecificationsBasic Tools Needed Installation InstructionsSafety Instructions Window RequirementsBefore Installation Type a Type B Type C Type D Type E Parts for installation are as follows Sill Bracket 2 piecesM8 x 45 M5 x 30 M4 x Release left-lower snap-fit Insert Window Kit Frames to Top Guide and Lower Guide Placing ChassisRecheck Installation Part Name Names of Major ComponentsFAN & Cooling Control Temperature ControlOperating Instructions For Most Economical USEGeneral Information AIR Filter Care and MaintenanceCleaning the AIR Conditioner Clean the air filter, which removes dust inside the roomDo not use a two prong adapter Electrical RequirementsElectrical Grounding Instructions USE of Extension CordDifficulty Possible Cause Suggested Solution Before Calling for ServiceLimited Warranty Window Type Room AIR Conditioner Room AIR Conditioner USE & Care Manual

DWC-121CS, DWA-150C, DWC-100CS, DWA-122CS, DWC-100C specifications

Daewoo has established a formidable reputation in the domain of home appliances, particularly in the air conditioning and cooling sector. Among its noteworthy offerings, the Daewoo DWC-100CS, DWA-151C, DWA-150C, DWA-151CS, and DWA-122CS models stand out, boasting a blend of efficiency, modern technology, and user-friendly features. These air conditioners address a variety of needs, making them suitable for both residential and commercial applications.

The Daewoo DWC-100CS is renowned for its compact design combined with powerful cooling capabilities. It features an energy-efficient compressor that helps reduce electricity consumption while maintaining optimal cooling performance. The device is equipped with a remote control for effortless operation, allowing users to adjust settings from a distance. Additionally, the air conditioning unit comes with a user-friendly LED display, making it easy to monitor and control the temperature and settings.

The DWA-151C and DWA-150C models share many technological advancements, including a multi-stage air filtration system that helps improve air quality by trapping dust, allergens, and other particles. These models are designed with inverter technology, enabling them to adjust their power consumption based on the required cooling, which not only saves energy but also ensures consistent comfort levels.

For those looking for added convenience, the Daewoo DWA-151CS incorporates Wi-Fi connectivity, allowing users to control the unit remotely via a smartphone app. This model also features a smart sensor that detects the ambient temperature, optimizing performance for energy savings and comfort. Its sleek design and quiet operation make it a visit-friendly option for any living space.

The DWA-122CS is a versatile model that offers cooling, heating, and dehumidifying functionalities, catering to varied climate conditions. Its adjustable thermostat enables users to set their desired temperature with precision. The unit is designed with an efficient drainage system for easy maintenance, ensuring that users can enjoy a hassle-free experience.

In summary, the Daewoo DWC-100CS, DWA-151C, DWA-150C, DWA-151CS, and DWA-122CS represent a significant advancement in air conditioning technology. With features like energy-efficient compressors, advanced filtration systems, and smart capabilities, these models are engineered to provide efficient cooling, improved air quality, and enhanced user control, making them a valuable addition to any environment.
Top Page Image Contents