Daewoo DSB-F154LH owner manual To SET the OFF Timer Mode

Page 12

TO SET THE OFF TIMER MODE

This unit can be set to automatically turn off after a predetermined amount of hours (up to 12) in the order of 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12.

1.Press the ON/OFF button of timer on the remote control to set the off timer mode, “HOUR” and “OFF” on the remote display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired time. Then, if pressing “ENTER/CANCEL” button, OFF TIMER Mode will be started. If you want to stop OFF TIMER Mode, please press “ENTER/CANCEL” again.

2.Press the TIMER OFF button once to enter the Timer screen.

AUTO

3.Repeatedly press the TIMER OFF button until the desired hour that you want the unit to shut off appears on the display.

For example, if it is 8:00 P.M. and you want the unit to turn off at 10:00 P.M., select 2 hours.

5.When the desired hour is reached, the unit will turn off.

NOTE:

Press the ENTER button within 5 seconds of selecting the desired time. If mote than 5 seconds elapse, steps 3 and 4 must be repeated.

4.Press the ENTER button to input the setting into memory; the unit will beep, the TIMER indicator will light on the unit and the TIMER indicator on the remote will light to indicate the unit is in the timer mode.

AUTO

11

Image 12
Contents DSB-F154LH Safety Instructions Important NotesLocation of Controls Indoor UnitOutdoor Unit Indoor Unit Display Indoor Unit DisplayRemote Controller DSB-F154LH Remote DisplayTURBO/MILD CoverConnecting the AC Cord HOW to Install BatteriesBattery Precautions OperationSetting the Unit for Remote Operation Celsius to Fahrenheit Conversion ChartTo SET the Unit to Auto Mode Three Minute Compressor DelaySET Unit to Quick Mode To SET Unit to Cool ModeFAN Speeds To SET Unit to Dehumidifier Mode To Operate only FANTo SET Unit to Heat Mode only Heat Pump Model To Select the FAN DirectionTo SET the on Timer Mode To SET the OFF Timer Mode To SET Unit to Sleep Mode To SET TURBO/MILD ModeEmergency Operation CHANGING/CLEANING the AIR Filters Installing the Remote Bracket Care and Maintenance After the SeasonTroubleshooting Guide Sysptoms Possible Cause Possible SolutionsInstruction of Installation Overview