Danby DPAC12010H warranty Remote Control Features, Control Buttons Power Switch Mode Fan Speed

Page 8

 

OPERATION (cont’d)

 

 

 

 

 

The AUTO-TIMER feature offers a unique selection of multiple choice, fully automatic

AUTO-TIMER

 

on and/or off (start/stop) programs between 1-24 hours under any one mode of your Home

 

 

Comfort unit.

The programs are as follows:

a)Auto-Off: Pre-select a time that will turn off the unit automatically (between 1-12hrs).

b)Auto-On: Pre-select a time that will turn on the unit automatically (between 1-12hrs).

c)Auto-On & Auto Off: Pre-select a time that will

turn the unit ON / OFF automatically at specified times (between 1-12hrs).

Note: These functions must be performed daily, as the program is automatically canceled/erased after the program has ended.

REMOTE

CONTROL FEATURES

Control Buttons:

1

1)

Power Switch

 

2)

Mode

3

3)

Fan Speed

4

 

 

4)On / Off Timer

5)Time / Temperature Set

Used for adjusting the timer and temperature.

The default display on control panel is room temperature.

When or key is pressed in cool mode, the set temperature is displayed and may be adjusted. After 10 seconds, the display will revert back to room temperature.

Timer setting is available from 1-24 hours by pressing or keys.

To operate the hand held remote control you will require two “AAA” Alkaline batteries (included).

Batteries should be replaced when:

a)No signal (beep) is heard when attempting to program the main unit.

b)The main unit does not respond to a command issued by the remote control.

Battery replacement:

1)Slide the rear cover on the remote in the direction of the arrow. Continue pulling (gently) until the cover separates completely from the unit.

2

5

2)Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside the battery chamber (+ / -).

3)Re-install rear cover.

4)If the remote control will not be used for extended periods of time, batteries should be removed.

The remote operates within a range of 8 meters (26 ft.) from the receiver located inside the main unit. Any obstruction between the receiver and remote may cause signal interference, limiting the ability to program the unit.

Notes:

1)Do not drop the remote control.

2)Do not place the remote control in a location exposed to direct sunlight.

3)The remote control should be placed about 1 meter or more away from TV, or any electrical appliances.

This Class B digital apparatus complies with canadian ICES-003.

7

Image 8
Contents Conserver CES Instructions Pour Consultation Ultérieure DPAC12010HKeep These Instructions for Future Reference Welcome Part Identification Important Safety InformationElectrical Specifications Power Supply CordEnergy Saving TipsInstallation Flexible Exhaust Hose 13cm & Exhaust nozzle connectorAir Conditioning Mode only Window KITOperation Operation cont’d AIR ConditionerRemote Control Features Control Buttons Power Switch Mode Fan SpeedBattery replacement Batteries should be replaced whenCare and Maintenance Cleaning UnitCleaning Damage to the unitTroubleshooting Problem Possible Cause SolutionsBienvenue 800-26Identification DE Partie Consignes DE Sécurité ImportantSpécifications Électriques TableauConsignes DE Sécurité Important suite CordonÉconomiseur ’ENERGIEMode Climatisation Seulement KIT DE FenêtreFonctionnement Minuterie AutomatiqueFonctionnement suite ClimatiseurCaractéristiques DE Télécommande Boutons De CommandeAutomatique Les piles devraient être remplacées quandSoins ET Entretien Nettoyage DE L’UNITÉNettoyage DES Pourrait causer des dommages à l’unitéProbleme Cause Probable Solution DépannagePortable AIR Conditioner Climatiseur Portatif

DPAC12010H specifications

The Danby DPAC12010H is a portable air conditioner that offers a perfect blend of efficiency and versatility, making it an ideal solution for cooling spaces up to 550 square feet. With its sleek design and user-friendly features, this unit stands out in the market of portable cooling solutions.

One of the main features of the DPAC12010H is its impressive cooling capacity of 12,000 BTUs, which ensures that it can effectively lower temperatures in medium-sized rooms. This makes it suitable for bedrooms, living rooms, and even office spaces. It operates using environmentally friendly R-410A refrigerant, which not only helps reduce carbon emissions but also enhances cooling efficiency.

The unit comes equipped with a three-in-one functionality that includes air conditioning, dehumidification, and fan modes. This versatility allows users to adjust the settings according to their specific needs. The dehumidifier operates at a removal rate of 80 pints per day, helping to maintain optimal humidity levels in your indoor environment, which is particularly beneficial during humid summer months.

To enhance user convenience, the Danby DPAC12010H includes a programmable timer and adjustable thermostat. The timer allows users to set the desired cooling schedule, ensuring that the space reaches a comfortable temperature by the time they arrive home. The remote control feature further enhances convenience, enabling users to adjust settings from anywhere within the room.

The Danby DPAC12010H also comes with an innovative self-evaporative system, which reduces the need for constant draining. In most conditions, the moisture collected during the cooling process is discarded through the exhaust hose, minimizing maintenance and allowing for uninterrupted cooling sessions.

Another notable characteristic of this portable air conditioner is its compact design, which makes it easy to move around. It features robust caster wheels and side handles, enabling effortless relocation from room to room. The sleek, contemporary look of the unit allows it to blend seamlessly with any interior décor.

In summary, the Danby DPAC12010H is a powerful, efficient, and versatile portable air conditioner equipped with advanced technology and features. With its user-friendly controls, effective cooling capabilities, and convenient mobility, it stands out as an excellent choice for maintaining comfort in various indoor settings.