Danby DAC 5209M manual Care and Maintenance, END Season Care, AIR Filter Removal

Page 9

CARE AND MAINTENANCE

When cleaning the air conditioner, be sure to turn the SELECTOR knob to the “OFF” position and disconnect the power cord from the electrical outlet.

1)DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as these substances may cause damage to the finish and deformation of plastic parts.

2)Never attempt to clean the unit by pouring water directly over any of the surface areas, as this will cause deterioration of electrical components and wiring insulation.

AIR FILTER

If the air filter becomes clogged with dust, air flow is obstructed and reduces efficiency. The air filter should be cleaned every 2 weeks.

AIR FILTER REMOVAL:

The air filter is located behind the air intake front grill. To remove the air filter, grasp the filter handle on the front of the gril and slide it out to the right.

To reinstall the air filter, reverse the above procedures. The air filter must be vacuumed or washed by hand in warm water. Dry thoroughly before re-installing.

CLEANING AIR FILTER:

1)Use a vacuum cleaner with soft brush attachment

2)Wash the filter in lukewarm water below 40°C (104°F): To get best results, wash with soapy water or a neutral cleaning agent.

3)Rinse the filter with clean water and dry thoroughly before re-installing.

IMPORTANT: DO NOT forget to install the air filter. If the air conditioner is left to operate without the air filter, dust is not removed from the room air and may result in machine failure. When the air inlet grill and cabinet are dirty, wipe with lukewarm water (below 40°C). Use of a mild detergent is recommended.

END OF

SEASON CARE

1)Operate the fan alone for half a day to dry out the inside of the unit.

2)Turn off power and remove plug from wall socket.

3)Clean filter.

4)Store (covered) air conditioner in a dry location.

CAUTION: When installing and/or removing the air conditioner from the window, ensure that caution is taken to prevent it from falling backward. It is recommended that installation or removal of the air conditioner is done with assistance to prevent injury to persons or damage to the unit or property.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Climatiseur DAC 5209MTable of Contents Welcome Unit SpecificationsImportant Safety Information Electrical SpecificationsPart Identification Supply Cord PowerEnergy Saving TipsTools Needed for Installation InstallationLocation Pencil Scissors Measuring TapeAssembly of the Upper Channel to Cabinet Installation cont’dAssembly of the Side Curtains to Cabinet Completing the InstallationSelector Switch Operating InstructionsThermostat Cleaning AIR Filter Care and MaintenanceAIR Filter END Season CareTroubleshooting Problem Possible Cause Solution800-26 Table DES Matiéres Spécifications DE L’UNITÉ Identification DE PartieSoins ET Entretien Spécifications DE L’UNITÉ BienvenueIdentification DE Partie Specifications ElectriqueConsignes DE Sécurité Important TableauSuggestions Cordon’ALIMENTATION Pour L’ÉCONOMIECiseaux Clé réglable EndroitPour compléter l’installation Installation suiteMontage de canaux supérieur sur le caisson Montage des rideaux latéraux au caissonFonction DE Consignes D’UTILISATIONSélection Vitesse DU VentilateurSoins ET Entretien Filtre À AIREntretien Hors Saison Dépannage Probleme Cause Probable SolutionPortable Air Conditioner DAC5209M

DAC 5209M specifications

The Danby DAC 5209M is a versatile and efficient window air conditioning unit designed to provide optimal cooling for small to medium-sized spaces. With a cooling capacity of 5,000 BTU, this model is well-suited for areas up to 250 square feet, making it an ideal choice for bedrooms, offices, and small living rooms.

One of the standout features of the Danby DAC 5209M is its energy efficiency. It boasts an impressive Energy Efficiency Ratio (EER) of 12.1, which means it consumes less energy while effectively cooling your space. This can lead to lower utility bills, allowing users to enjoy a comfortable environment without worrying about excessive energy costs.

The unit is equipped with a mechanical control system, which includes adjustable thermostat settings and fan speeds. Users can easily customize their cooling experience by selecting from three different fan speeds and modes, including a dehumidification option that effectively removes excess moisture from the air. This makes it perfect for use in humid climates, as it not only cools the air but also helps maintain a comfortable humidity level.

In terms of installation, the Danby DAC 5209M is designed for easy window mounting. The unit comes with a detailed installation guide and all necessary accessories, making setup a straightforward process even for those with limited DIY experience. Its compact design allows it to fit snugly in most window sizes.

Another impressive characteristic of this air conditioner is its low noise operation. With a sound level of around 52 dB on low speed, it operates quietly, ensuring minimal disruption to your daily activities or nighttime sleep. This makes it an excellent choice for bedrooms or study areas, where concentration and comfort are essential.

Moreover, the Danby DAC 5209M features a reusable and washable air filter, which helps maintain the unit's efficiency while improving air quality. Regularly cleaning the filter can extend the lifespan of the air conditioner and ensure optimal performance.

In summary, the Danby DAC 5209M is a reliable and energy-efficient window air conditioning unit that combines essential cooling power with user-friendly features. Its balanced performance, quiet operation, and ease of installation make it an ideal choice for anyone seeking to enhance their indoor comfort during the warmer months.
Top Page Image Contents