Blue Sea Systems PN 8244 specifications Analog AC Voltmeter, Installation

Page 1

Marine Electrical Products

Analog AC Voltmeter

0-150 Volts PN 8244 / PN 9353

0-250 Volts PN 8245 / PN 9354

Meter Specifications

Input Voltage:

PN

Voltage

 

8244/9353

0-150 Volts AC

 

8245/9354

0-250 Volts AC

Amperage Draw:

1 Milliampere

 

Display:

Analog scale

 

Accuracy:

3% of scale range

 

Face Width:

PN

Inches

Millimeters

8244/8245

2

50.80

 

9353/9354

2-5/8

66.70

Mounting Hole:

8244/8245

1-1/2

38.10

 

9353/9354

1-7/8

47.60

Guarantee

Any Blue Sea Systems product with which a customer is not satisfied may be returned for a refund or replacement at any time.

Installation

Warning

It is not possible within the scope of these instructions to fully acquaint the installer with all the knowledge of electrical systems that may be necessary to correctly install this product. If the installer is not knowledgeable in electrical systems we recommend that an electrical professional be retained to make the installation.

1. Disconnect all AC and DC power

Disconnect all AC power originating on or off the vessel. This includes inverters, generators, shore power attachments and any other device capable of supplying AC power to the ship’s circuits. Disconnect the main positive DC cable from all batteries to eliminate the possibility of a short circuit and to disable the inverter while installing the meter.

Blue Sea Systems Inc.

425 Sequoia Drive Bellingham, WA 98226 USA

Phone (360) 738-8230 Fax (360) 734-4195

E-mail conductor@bluesea.com

www.bluesea.com

9332 Rev. 003

Marine Electrical Products

Analog AC Voltmeter

0-150 Volts PN 8244 / PN 9353

0-250 Volts PN 8245 / PN 9354

Meter Specifications

Input Voltage:

PN

Voltage

 

8244/9353

0-150 Volts AC

 

8245/9354

0-250 Volts AC

Amperage Draw:

1 Milliampere

 

Display:

Analog scale

 

Accuracy:

3% of scale range

 

Face Width:

PN

Inches

Millimeters

8244/8245

2

50.80

 

9353/9354

2-5/8

66.70

Mounting Hole:

8244/8245

1-1/2

38.10

 

9353/9354

1-7/8

47.60

Guarantee

Any Blue Sea Systems product with which a customer is not satisfied may be returned for a refund or replacement at any time.

Installation

Warning

It is not possible within the scope of these instructions to fully acquaint the installer with all the knowledge of electrical systems that may be necessary to correctly install this product. If the installer is not knowledgeable in electrical systems we recommend that an electrical professional be retained to make the installation.

1. Disconnect all AC and DC power

Disconnect all AC power originating on or off the vessel. This includes inverters, generators, shore power attachments and any other device capable of supplying AC power to the ship’s circuits. Disconnect the main positive DC cable from all batteries to eliminate the possibility of a short circuit and to disable the inverter while installing the meter.

Blue Sea Systems Inc.

425 Sequoia Drive Bellingham, WA 98226 USA

Phone (360) 738-8230 Fax (360) 734-4195

E-mail conductor@bluesea.com

www.bluesea.com

9332 Rev. 003

( Installation (continued)

2.Select mounting location and cut opening

Select a mounting location which is protected from water on the meter front and back and is not in an area where flammable vapors from propane, gasoline or lead acid batteries accumulate. The meter is not ignition protected and may ignite such vapors. There are two mounting methods for the meters, surface mount or panel mount.

Surface Mount: Drill five clearance holes as shown below. The part number of the meter will determine the size and location of the clearance holes. Use the nuts and washers supplied in the accessory package to secure the four mounting studs to the mounting surface. This method will work on mounting surfaces up to 5/8” thick.

PN 8244

/ PN 8245

PN 9353 / PN 9354

Micro

Meters

Standard Meters

Panel Mount: For thicker mounting surfaces, the meter can be mounted into a 0.125” thick panel. Blue Sea Systems offers meter mounting panels for our standard size meters only. Use PN 8013 to mount a single meter or PN 8014 to mount two meters.

( Installation (continued)

2.Select mounting location and cut opening

Select a mounting location which is protected from water on the meter front and back and is not in an area where flammable vapors from propane, gasoline or lead acid batteries accumulate. The meter is not ignition protected and may ignite such vapors. There are two mounting methods for the meters, surface mount or panel mount.

Surface Mount: Drill five clearance holes as shown below. The part number of the meter will determine the size and location of the clearance holes. Use the nuts and washers supplied in the accessory package to secure the four mounting studs to the mounting surface. This method will work on mounting surfaces up to 5/8” thick.

PN 8244

/ PN 8245

PN 9353 / PN 9354

Micro

Meters

Standard Meters

Panel Mount: For thicker mounting surfaces, the meter can be mounted into a 0.125” thick panel. Blue Sea Systems offers meter mounting panels for our standard size meters only. Use PN 8013 to mount a single meter or PN 8014 to mount two meters.

Image 1
Contents Analog AC Voltmeter InstallationVolts PN 8244 / PN Volts PN 8245 / PN Calibration Wiring Diagram

PN 8244 specifications

Blue Sea Systems PN 8244 is a state-of-the-art electrical distribution and management panel specifically designed for marine applications. This product stands out in the market due to its advanced features, robust construction, and user-friendly interface, making it an ideal choice for boat owners seeking reliability and efficiency in their electrical systems.

One of the primary features of the Blue Sea Systems PN 8244 is its capacity to accommodate various electrical needs. It offers multiple circuit configurations, allowing users to customize their setup according to the specific requirements of their vessel. This flexibility is crucial for those who want to power numerous devices such as navigation equipment, lighting, and entertainment systems without sacrificing performance.

The panel is constructed with high-quality materials that ensure durability and resistance to the challenging marine environment. The use of corrosion-resistant hardware makes it suitable for both freshwater and saltwater applications, reducing the risk of failure over time. Additionally, the PN 8244 features a clear, backlit display that provides vital information at a glance, ensuring that users can monitor the status of their electrical systems efficiently.

Another significant attribute of the PN 8244 is its integration of advanced technologies aimed at enhancing safety and functionality. The panel is equipped with intelligent monitoring capabilities that alert users to any electrical faults, such as overcurrent issues or grounding problems. This proactive approach helps prevent damage to onboard electronics and ensures the safety of all personnel aboard.

The design of the PN 8244 also emphasizes ease of use. Clearly labeled switches and circuits make it easy for users to identify and operate various systems, even in low-light conditions. Furthermore, its compact size allows for straightforward installation in tight spaces commonly found on boats.

In summary, Blue Sea Systems PN 8244 is an exemplary electrical distribution panel that combines functionality, safety, and durability. Its versatility in circuit configurations, robust construction materials, integrated monitoring technologies, and user-friendly design make it an essential component for modern marine electrical systems. The PN 8244 represents a commitment to quality and reliability, making it a preferred choice for boat owners who demand the best for their vessels.