AllerAir none AllerAir AirMedic+ Indoor Air Purification System, Filters Assembly Air Medic +

The AllerAir AirMedic+ - Indoor Air Purification System

Congratulations, you are moments away from fresher, cleaner indoor air. Your new AllerAir unit will combat many of the chemicals, gases, odors and particles responsible for poor indoor air quality, and in turn, health concerns such as allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with any air cleaner, proper maintenance of your unit is a vital part of keeping it operating at peak efficiency.

Operation:

Your unit is shipped fully assembled and ready for use. Plug into 120V-15amp outlet. For best results situate your unit close to your sitting, sleeping or work area.

NOTE: Please save your packaging. Original packaging will be required for all warranty returns.

FILTERS ASSEMBLY - Air Medic +

Follow this instruction when your filters and unit are shipped in separated boxes.

Step 1	Step 2
Turn Power Off and	With a #2 Philips screw driver,	Step 3
unplug from receptacle.	remove the four screws from the	Gently grasp wheels. Remove the
Lay unit upside down.	bottom of the unit.	base by pulling gently on the wheel

TEN YEAR LIMITED WARRANTY

AllerAir units in this series are covered by a ten-year warranty against defects in materials and workmanship for a period of ten years from the date of purchase.

Warranties are limited to the original purchaser and are thus non- transferrable.

Units must be shipped back to AllerAir in their original packaging. Clients are responsible for insuring packages with carriers such as UPS.

The warranty does not cover expendable parts such as filters and pre-filters.

AllerAir Industries Inc. is not liable for any consequential damages for breach of this or any other warranty expressed or implied whatsoever.

Five years parts and labor additional five years parts.

AllerAir top quality air purification machines are distributed worldwide for commercial, residential, institutional and industrial use. The units employ cutting-edge technology, and are built according to the highest standards required for health and safety.

Step 4

Reach inside the unit and remove only 1 of the 2 felt pads.

Step 7

Put back the felt pad removed in Step 4.

Step 5

Gently insert HEPA filter into the unit.

Step 8

Place lid back to its proper position by aligning the arrow with the rear seam.

Step 6

Than put in the Carbon filter.

Step 9

With a screw driver, place 4 screws back into their positions.

6 AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www.allerair.com

Step 10

Gently turn the unit back onto its wheels. And your AllerAir purifier is now ready for use.

3