Air Oasis Dual Induct (120v) Important Safety Instructions, Step, Replacement Date Reminder

Page 2

Important Safety Instructions

When operating electrical appliances, basic precautions should always be fol- lowed.

WARNING To reduce the risk of fire, electric shock or injury:

Do not use outdoors or on wet surfaces.

Use only as described in this manual.

Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 1-800-936-1764.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle plug or appliance with wet hands.

Do not put any object into openings.

Turn off all controls before unplugging.

CAUTION

AHPCO™ Cell contains Hg (Mercury) and should be disposed of according to disposal laws. Find disposal centers at www.earth911.org.

If the UV lamp is broken do not touch the cell or glass with your hands.

UV lamp may be hot and could cause serious burns if not handled properly. Please wait until the AHPCO Cell has cooled to room temperature to remove from unit.

WARNING: UV Light Hazard. Harmful to skin and eyes. Can cause temporary or permanent loss of vision. Never look at the lamp while illuminated. To prevent exposure to ultraviolet light, be sure the pow- er is disconnected before servicing.

WARNING: RISK OF ELECTRICAL SHOCK. CAN CAUSE INJU-

RY OR DEATH: UNPLUG OR DISCONNECT UNIT FROM POWER SUPPLY BEFORE SERVICING.

Disclaimer – The health aspects associated with the use of this product and its ability to aid in disinfection of environment air have not been investigated by UL, located on front panel of fixture and in the instruction manual.

Step 3

Remove four (4) wing-nuts secur- ing the AHPCO Cell in place. Then slide the AHPCO Cell up and out of the unit.

CAUTION

UV lamp may be hot and could cause serious burns if not handled properly. Please wait until AHPCO Cell has cooled to room tempera- ture to remove from unit.

AHPCO™ Cell contains Hg (Mer- cury) and should be disposed of according to disposal laws. Find disposal centers at www.earth911. org.

Step 4

Reverse steps 1-3 to set new AHPCO Cell in place. Be sure to place the exposed tip of the fiber optic cord between the first rings of the new AHPCO Cell and in close proximity to the UV lamp. This will ensure the indicator light functions properly.

Replacement Date Reminder

The AHPCO™ Cell should be replaced every three years.

3 Years Date:

6 Years Date:

9 Years Date:

Hg lamp contains mercury. Manage in accord with disposal laws. Find disposal centers at www.earth911.org.

1

6

Image 2
Contents Troubleshooting Guide Problem Reason SolutionStep Important Safety InstructionsReplacement Date Reminder Dual Induct Installation Instructions Cut Out Table of Contents Installation and Operation WarrantyMaintenance and Customer Service

Dual Induct (120v) specifications

The Air Oasis Dual Induct (120v) is an innovative air purification solution designed to enhance indoor air quality for homes and commercial spaces. This advanced system combines cutting-edge technologies to effectively eliminate harmful pollutants, ensuring a healthier environment for occupants.

One of the standout features of the Air Oasis Dual Induct is its dual induct design, which allows for the simultaneous treatment of air and surfaces. This approach addresses the most pressing air quality issues by reducing airborne contaminants while also targeting bacteria and viruses that settle on surfaces. With this dual action, users can experience improved peace of mind, knowing that their environment is constantly being purified.

The Air Oasis Dual Induct utilizes a patented technology known as AHPCO (Advanced Hydrated Photocatalytic Oxidation). This process generates a unique blend of hydrogen peroxide and superoxide ions that actively neutralize pathogens, allergens, and odors. These molecules are safe for human exposure and effectively eliminate a vast range of microorganisms, including mold, bacteria, and viruses.

Another key characteristic of this unit is its low energy consumption, making it a cost-effective solution for air purification. Operating on a standard 120-volt power supply, the Dual Induct is designed for easy integration into existing HVAC systems, providing reliable and continuous air purification without the need for extensive modifications.

The sleek and compact design of the Air Oasis Dual Induct makes it suitable for various settings, including homes, offices, and healthcare facilities. With its quiet operation, it can function unobtrusively in the background, ensuring that users can breathe easy without disruptive noise.

Routine maintenance is minimal, as the unit comes equipped with easily replaceable filters that are designed to provide long-lasting performance. The Air Oasis Dual Induct also features a user-friendly interface that allows for straightforward operation and monitoring.

In summary, the Air Oasis Dual Induct (120v) offers a robust and efficient solution for improving indoor air quality. With its unique dual induct design, advanced AHPCO technology, and energy-efficient operation, it stands out as a premier choice for anyone looking to create a cleaner and healthier living or working environment.