Carrier Access 52C Wall Thermostat Installation, Install Thermostat All remote control units

Page 7

WALL THERMOSTAT INSTALLATION

The following instructions apply to RC and RP units only.

NOTE: Carrier thermostats are recommended. See Accessories section.

IMPORTANT: Only trained, qualified personnel and service mechanics should install electrical accessories on Carrier 52C series products per Carrier’s installation instructions. Please contact your local electrical contractor, dealer, or distribu- tor for assistance.

INSTALL THERMOSTAT — All remote control units.

1.Check to be sure power to unit is disconnected.

2.Remove terminal board cover from control box cover by removing screw (see Figure 10).

NOTE: Terminal connector can be removed and re- placed to simplify thermostat wiring.

3.Connect wires from terminals on the thermostat to terminals on chassis terminal board connector. See Figures 11 and 12.

TERMINAL

FANCOVER SWITCH

HI

LO

SCREW

4.Reinstall cover.

5.Set desired fan speed using fan switch (unit will operate only at selected speed).

6.Restore power to unit.

NOTE: Refer to thermostat installation instructions for details on installing thermostat.

 

R

 

G

TYPICAL

Y

WALL

 

THERMOSTAT

W

 

O

 

C

 

52C TERMINAL

 

BLOCK

NOTES:

1.Use terminal “O” for heat pump connection only.

2.See table below for terminal descriptions.

TERMINAL

DESIGNATION

R

24 VAC

G

Fan

Y

Compressor

W

Electric Heat

O

Reversing Valve

C

Common

FIGURE 11 — WIRING CONNECTIONS

POWER

THERMOSTAT

CORD

 

FIGURE 10 — CONTROL BOX TERMINAL COVER

R

G

Y

W

O

C

FIGURE 12 — TERMINAL CONNECTOR

REMOVAL AND REPLACEMENT

7

Image 7
Contents Packaged Terminal AIR Conditioners Heat Pumps ContentsUnit Inspection GeneralFront Panel Model Number Nomenclature ALL Units Electrical DataVoltage Supply Chassis Installation InstallationLocation of Shipping Tape On Vent Door Install Chassis in Sleeve See Figures 6 toInstall Thermostat All remote control units Wall Thermostat InstallationComfort Controls Adjust Airflow Direction The dischargeSetting Temperature Limits Setting tem OperationWall Thermostat Control Blank Plate Operating ControlsINDOOR-AIR Inlet Filters should be cleaned once each month Care and MaintenanceINDOOR-AIR Inlet Filters Internal Parts External PartsLeft Side of Chassis Preventative Maintenance Possible Causes Solutions Unit does not Start TroubleshootingAccessory Form Number Part Number Description AccessoriesPage Copyright 2001 Carrier Corporation

52C specifications

The Carrier Access 52C is a versatile, high-performance telecommunications device designed for service providers seeking to deliver robust connectivity solutions. This compact access platform seamlessly bridges the gap between various communications protocols, enabling carriers to efficiently manage bandwidth and optimize their service offerings.

One of the standout features of the Carrier Access 52C is its multi-service capabilities. It supports T1/E1 and DS3 traffic, making it suitable for both traditional and modern network environments. This flexibility allows carriers to tailor their services to meet diverse customer needs, whether they are delivering voice, data, or video services.

The device integrates advanced technologies, including digital signal processing (DSP) and embedded service aggregation. This ensures that the Carrier Access 52C can handle high bandwidth demands while maintaining low latency and high reliability. The DSP technology enhances the overall efficiency of data processing, which is critical for service providers looking to optimize their networks.

An additional key characteristic of the Carrier Access 52C is its scalability. The modular design allows for easy upgrades and expansions, enabling service providers to increase capacity as demand grows. This future-proofing aspect is crucial in a competitive landscape where technology and user requirements continually evolve.

Security features are also a significant focus of the Carrier Access 52C. The device offers comprehensive security protocols to protect against unauthorized access and data breaches. This is particularly important for carriers who must ensure the integrity and confidentiality of their customer transactions.

Operational efficiency is further enhanced through its user-friendly management interface. The Carrier Access 52C supports remote management and monitoring capabilities, which facilitate real-time system checks and configuration adjustments. This reduces the need for on-site visits and allows for quicker response times to issues, ultimately improving overall service delivery.

In summary, the Carrier Access 52C stands out in the telecommunications market due to its multi-service capabilities, advanced technology integration, scalability, robust security features, and user-friendly management. It is an ideal solution for carriers looking to enhance their service offerings and meet the ever-increasing demands of today's digital landscape. With its comprehensive features and characteristics, the Carrier Access 52C continues to be a reliable choice for telecommunications professionals.