About the controls on the air conditioner

Operating Instructions Safety Instructions

About the controls on the air conditioner.

Features and appearance will vary.

TEMP CONTROL

MODE CONTROL

Controls

Installation Instructions

Temp Control

The temp control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort. Turn the knob clockwise to Cooler (blue) and the indoor air will become cooler. Turn the knob counterclockwise to Warmer (red) and the indoor air will become warmer.

Mode Control

Hi Cool and Low Cool provide cooling with different fan speeds.

Hi Heat and Low Heat provide heating with different fan speeds.

Fan Only setting provides air circulation and filtering without cooling or heating.

NOTE: If you move the mode control from a cool setting to Off, a fan setting or a heat setting, wait at least 3 minutes before switching back to a cool setting.

Consumer Support Troubleshooting Tips

Cooling Descriptions

For Normal Cooling—SelectHi Cool or

Low Cool with the temp control at midpoint.

For Maximum Cooling—Select Hi Cool with the temp control turned clockwise as far as possible.

For Quieter & Nighttime Cooling—Select

Low Cool with the temp control at midpoint.

Heating Descriptions

For Normal Heating—SelectHi Heat or

Low Heat with the temp control at midpoint.

For Maximum Heating—Select Hi Heat with the temp control turned counterclockwise as far as possible.

For Quieter & Nighttime Heating—Select

Low Heat with the temp control at midpoint.

Circulaire

	For continuous


	side-to-side air
	side-to-side air
	circulation, set
	the Circulaire
	the Circulaire
	switch to On.
	For fixed side-to-side air direction, set the
	Circulaire switch to On until the desired air
4	direction is obtained, then move it to Off.
4