PACKAGE ONE - ADA/ANSI/TAS G 6017 TS FB IBS 2P
No modifications accepted (Packaged units only)
ADA/TAS COMPLIANCE REQUIREMENTS
For ADA/TAS compliance: seat securely mounted at head end, one horizontal grab bar mounted on the valve wall, two horizontal grab bars mounted on the back wall, one horizontal grab bar mounted on the head wall and one vertical grab bar mounted on the valve wall near the entry. Pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose. Unit and accessories must be installed per ADA/TAS and Praxis guidlines.
FRAMING DIMENSIONS
A | B | C | D |
6041” 3221” 16” | 1612” |
6” x 6” minimum opening
in floor for drain
connection
STANDARD FEATURES
High gloss gelcoat finish Two piece design Phenolic fold up seat Stainless steel grab bars
STANDARD CODES
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
ICADAC/ANCODESSI A117.1 HUD/ADA UFAS
TAS
(when fully equipped)
Unit configured with standard features, pressure balanced control valve and hand held shower package.
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
UPC/SKU NUMBERS Left Hand Valve: |
| Right Hand Valve: | |
|
|
|
|
THIS ORDER WILL NOT BE PROCESSED UNLESS THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS PROVIDED.
Signed: CONTRACTOR Date: | Contact Phone Number: CONTRACTOR |
Customer Service: