Features & Benefits

Cabinet

•Air moves across the ceiling in both directions providing even air distribution throughout the cooler

•Compact, ceiling mount and center mount design allows for shelving and storage of product around all walls

•Heavy-gauge grained aluminum cabinet cleans easily and looks attractive

•Stainless steel screws prevent rust streaks

•Panels on ends quickly remove for complete access to refrigerant components and electrical terminal block during installation and servicing

•Quick disconnect, waterproof plug and receptacle for each motor in all models

•Wire fan guards with PVC coating for durability

Coil

•High-efficiency aluminum fins with full collars cover mechanically expanded copper tubes

•Coils are dehydrated and sealed at the factory

•Highest quality tubular heaters provide fast and economical defrost

•Generous coil surface gives proper compressor balance

•Standard adjustable defrost termination fan delay thermostat

Drain Pan

•Double drain pan eliminates drain pan sweating

•Tapered mounting provides proper slope for condensate drainage to one end of the unit

Motors

•Motors are life lubricated and thermal overload protected

•EC motors (optional) available factory-installed or as a drop-in replacement through InterLink™ Commercial Refrigeration Parts in 115/1/60, 208-230/1/60 voltages

•PSC motors are optional for 115/1/60, 208-230/1/60 voltages

•PSC motors or EC motors are required for 50 Hz operation

Options

•Unit Configurations: mounted components, pre-assembled, pre-charged and Beacon II™

-Units available with mounted TXV and mounted TXV / solenoid valve

-Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat

-Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat and quick connect fittings

-Mounted room thermostat

-Beacon II units come with electronic expansion valves, pressure transducer, temperature sensors and Beacon control board

•Most models available with glycol circuiting (see glycol product brochure)

•Units available with stainless steel housing and drain pan

•Units available with copper fins. Air defrost units also available with polyester coated fins or various coil coatings options

All Bohn Center Mount units are UL listed for US and Canada and meet NSF standards