Heatmaster 201 manual Pilot Mode, Mcba for Specialists INSTALLER, Service Engineer, Pilot mode

Page 17

PILOT MODE

Pilot mode

After you power down the appliance the screen displays Pilot mode, as shown in the figure above.

This is the standard MCBA mode. The MCBA automatically returns to this mode after 20 minutes if no keys have been pressed on the screen. Any parameters that were modified are then enabled.

The first character shows the current status of the boiler depending on the condition of both the boiler and the burner. The last 2 characters indicate the start temperature.

Status

Boiler function

Pilot, no demand for heat

Fan first, fan after

Ignition

 

Operation of the boiler burner for the heating

Operation of the boiler burner for the domestic hot

water

 

Air pressure limit or obtaining the number of start

revolutions.

The burner goes out when the specified value is

reached. A demand for heat is present nonetheless.

Pump over-run time after the demand for domestic

hot water

 

Pump over-run time after the demand for central

heating

 

Burner blocked:

:T1 > 95°C

:T2 > 95°C

: T2 - T1 > 10.20 or 40°C after a time of xx

: dT1/dt > maximum gradient T1

: water pressure switch not off

: no fan signal

: erroneous fan signal

: T1 - T2 > max Delta

: NTC3 short-circuit

: NTC3 interrupt

: wait for the fan to start

If the burner is blocked for one of the reasons mentioned above, the screen display alternates between a 9 followed by the temperature (two last digits) and b with the error code.

MCBA FOR SPECIALISTS: INSTALLER, SERVICE ENGINEER

Once the cause of the blockage has been resolved, the burner starts automatically within 150 seconds at most.

Status

Boiler function

Internal check — three-way valve

Boiler burner in hot water ready function

Test function: Central heating high power

Test function: Central heating low power

Test function: Boiler with fixed number of revolutions

15

Image 17
Contents Installation, Operating Servicing Instructions Page Introduction IndexTarget Group CertificationUsing the Boiler General Information Safety InstructionsUser Guide Setting the ParametersDescription Construction FeaturesOperating Principle PackingDescription General Characteristics Technical SpecificationEffective Dimensions Domestic HOT Water Performances Heatmaster Setting InstructionsMaximum Operating Conditions Chimney Connections InstallationBoiler Room HOT Water Connections Electrical Connections Heating ConnectionHeatMaster Wiring Filling the HOT Water and Heating Circuits Commissioning Burner FeaturesACV BG 2000-M Modulating Premix GAS Burner Description and operating methodBG 2000-M/201 Gas burner characteristics11.0 2Er 2ERBMaintenance Mcba for Specialists INSTALLER, Service Engineer Pilot ModePilot mode Status Boiler functionTo unlock the system Safety Stop Error ModeCodes Description of the fault Resolution of the fault Setting the Parameters Key Display Description of the parameters Factory setting = enabled Code mode Information on the InstallationInfo mode Entering the CodeError Mode with Code Communication Mode with CodeFAN Mode with Code Temperature sensor resistance tablesJackets Codes HeatMaster Spare PartsService Record Service Record Page World.com

201 specifications

The Heatmaster 201 is an advanced wood stove designed for optimal heating efficiency and user comfort. This high-performance heating solution incorporates innovative technologies that enhance its functionality and appeal, making it a popular choice for homeowners seeking a reliable and eco-friendly wood-burning option.

One of the standout features of the Heatmaster 201 is its robust construction. Built from high-quality materials, it ensures durability and longevity, capable of withstanding the rigors of regular use. Its heavy-duty steel body provides excellent heat retention, allowing for a more prolonged and even distribution of warmth throughout the space.

The Heatmaster 201 employs a clean-burning technology that helps reduce emissions, making it an environmentally friendly choice. This technology not only minimizes the environmental impact but also improves fuel efficiency. It burns wood more completely, resulting in less creosote buildup in the chimney, thus reducing the risk of chimney fires and the need for frequent cleaning.

This stove features a large firebox, allowing for longer burn times. Users can enjoy extended periods of heat without the constant need to reload with fuel. The design also accommodates various log sizes, providing flexibility in fuel choices. This versatility makes it easier for homeowners to utilize available wood resources effectively.

Moreover, the Heatmaster 201 includes an airwash system that keeps the glass door clean, allowing for an unobstructed view of the fire. This not only enhances the aesthetic appeal of the stove but also ensures that users can monitor the fire's activity without the distraction of soot accumulation.

The installation of the Heatmaster 201 is simplified further by its compatible venting options. Whether through a chimney or direct vent systems, users can choose the setup that best suits their home layout. Additionally, safety features, including a secure ash pan and heat-resistant door handles, ensure safe operation.

In conclusion, the Heatmaster 201 is a remarkable wood stove that combines durability, efficiency, and user-friendly design. With its clean-burning technology, robust construction, and ease of maintenance, it stands out as an exceptional choice for those looking to enhance their heating solutions while minimizing environmental impact.