4Priming Scooba’s Pump- Scooba’s powerful cleaning system includes a pump that distributes cleaning solution from the tank onto your floor. To prime Scooba’s pump, fit the end of the included suction bulb over Scooba’s solution valve. Push air through Scooba’s pump system 3 or 4 times.
Solution
Valve
General Troubleshooting
Problem | Likely Cause | What To Do |
|
|
|
Scooba will not | Power is off | Press Power, then press Clean to start |
start cleaning |
| Scooba. |
|
|
|
| Battery is not charged | Charge Scooba’s battery. (page 11) |
|
|
|
| Battery is not correctly | Remove battery and ensure that battery |
| seated | tabs are placed inside Scooba’s guide |
|
| holes before closing Scooba’s tank. |
|
|
|
Excessive foam | There is too much | Empty and rinse the Clean tank thoroughly. |
coming out of Scooba | cleaning solution | When |
| concentrate in Clean | ounces of Scooba cleaning solution and |
| tank | to fill the Clean tank completely to the rim |
|
| with water. |
|
|
|
Cleaning head sticks | Cleaning head is not | With the tank open, slide the cleaning head |
out of Scooba, will | closed tightly over the | out of Scooba. Squeeze the cleaning head |
not engage | brush | completely closed over the brush before |
|
| |
|
| (page 18) |
|
|
|
24iRobot Scooba Owner’s Manual