General Safety Information

!NOTICE

TP-250 Utility Pump

Safety is a combination of common sense, staying alert and understanding how your utility pump works.

Safety Signal Words

!DANGER means if the safety information is not followed someone will be seriously injured or killed.

!WARNING means if safety information is not fol- lowed someone could be seriously injured or killed.

!CAUTION means if safety information is not fol- lowed someone may be injured.

indicates important information, that if not followed, may cause damage to the equipment or flooding .

!WARNING Read and understand all instruc- tions. Failure to follow all instructions listed below may result in fatal electric shock, fire, property dam- age, and/or serious personal injury.

SAVE THESE INSTRUCTIONS!

Work Area

!DANGER

•Do not operate pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Pump motors create sparks which may ignite the dust or fumes.

•Keep by-standers, children, and visitors away while installing pump. Distractions can result in mistakes.

Electrical Safety

! WARNING

•This pump must be plugged into an outlet, properly installed, and grounded in accordance with all applicable codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are not sure the outlet is grounded. If the pump should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

•Electrical wiring must be performed by a quali- fied electrician. Improper wiring could result in fatal electrical shock.

•Do not abuse cord. Never use the cord to carry the pump or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or mov- ing parts. Replace damaged cords immediate- ly. Damaged cords increase the risk of electrical

shock.

Grounded

Grounding Outlet

Blade

TEST RESET

Power

Cord

Figure 1

•Before using, test the Ground Fault Circuit Interrupter (GFCI) to insure it is operating cor- rectly. A GFCI reduces the risk of electrical shock.

•Do not use an extension cord. This increases the risk of electrical shock. If necessary, install a prop- erly grounded outlet closer to the pump.

Personal Safety

!WARNING

•Stay alert, watch what you are doing, and use common sense when installing this pump. Do not attempt to install this pump while tired or under the influence of drugs, alcohol or med- ications. A moment of inattention may result in serious personal injury.

•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

•Do not overreach. Keep proper footing and bal- ance at all times. Proper footing and balance enables better control in unexpected situations.

•Use safety equipment. Always wear eye protec- tion. Dust mask, non-skid safety shoes and hard hat must be used for appropriate conditions.

Service

!WARNING

•Pump service must be performed only by qual- ified repair personnel. Service or maintenance performed by unqualified repair personnel could result in injury and may void the warranty.

2	Ridge Tool Company

TP-250 specifications

The RIDGID TP-250 is a high-performance portable planer designed to deliver precision and efficiency for woodworking enthusiasts and professionals alike. Renowned for its robust construction and innovative features, the TP-250 stands out in the market as a reliable tool for achieving smooth and level surfaces on a variety of materials.

One of the key features of the RIDGID TP-250 is its powerful 15-amp motor, which provides a consistent and reliable performance. This motor is capable of delivering a maximum cutting speed of 26,500 RPM, allowing users to tackle a wide range of wood types with ease. Whether you are working on hardwoods, softwoods, or engineered wood products, the TP-250 ensures a clean finish and efficient material removal.

The integrated infeed and outfeed tables extend the wood support and provide stability, enabling users to handle larger workpieces without compromising precision. This feature is particularly advantageous for complex projects that require meticulous attention to detail.

Furthermore, the TP-250 comes equipped with a dual-edge, heat-treated steel knife system that enhances durability and cutting performance. The adjustable cutting depth goes up to 1/8 inch, allowing users to customize their cuts based on specific project requirements. This versatility makes it suitable for a variety of applications, from surface planning to creating beveled edges.

For added convenience, the TP-250 features an onboard dust collection port that helps maintain a clean working environment. By connecting to a compatible shop vacuum, users can minimize debris and improve visibility during operation. This thoughtful design consideration not only streamlines the workflow but also promotes safety in the workspace.

Another notable attribute of the RIDGID TP-250 is its ergonomic design, which incorporates a comfortable handle and a lightweight construction. This design allows for effortless maneuverability without sacrificing control during use. Additionally, the tool’s compact size makes it easy to transport, making it an ideal companion for both in-home projects and job sites.

In summary, the RIDGID TP-250 is a feature-rich portable planer that combines power, precision, and convenience. With its robust motor, dual-edge knife system, and user-friendly design, it is an excellent choice for both novice and experienced woodworkers looking to achieve outstanding results in their projects. Whether for personal use or professional applications, the TP-250 delivers reliability and performance, ensuring that wood surfaces are finished to perfection.