Fill line as shown opposite | ResMed Passover specification

FILLING THE HUMIDIFIER

1	Ensure that the humidifier is
	clean.
2	Do not fill the humidifier with hot
	or chilled water - use room
	temperature water.
3	Hold the humidifier upright and
	pour water through either the inlet
	or the outlet until it reaches the	Fill line
	fill line (as shown opposite).	Fill line
	fill line (as shown opposite).
4	Fill the humidifier with fresh
	water every night.

CONNECTING THE FLOW GENERATOR

1Position your flow generator on top of the humidifier. The front of the flow generator should sit between the inlet and outlet of the humidifier.

	1.	2 Connect the short air tube from the
	1.	flow generator to the humidifier.
		3 Fit the wide end of the outlet
		connector onto the humidifier
	4 Connect one	outlet and push it into place.
	4 Connect one
	end of the
	long air	3.
	tubing to the	3.
	outlet	2.
	connector,	2.
	connector,	4.
	and attach	4.
	your mask to
	the other end.

5Check that both the short and long air tubing are securely connected to the humidifier and the flow generator. The humidifier is now ready to use.

CLEANING INSTRUCTIONS

DAILY

Clean the humidifier every day after you use it. Follow these steps:

1Ensure that the flow generator is switched off. Disconnect the short air tubing. Remove the outlet connector from the humidifier. Lift the flow generator off the humidifier.

2Drain any remaining water from the humidifier.

3Wash the humidifier, outlet connector, and air tubing in warm water, using a mild detergent. Do not use hot water. Partly fill the humidifier and shake vigorously.

4Rinse thoroughly with clean water and allow the humidifier to air dry completely in a warm place (not in direct sunlight).

WEEKLY

Clean the humidifier thoroughly every week as follows:

1Soak the humidifier in a solution of one part vinegar and 3 parts warm water for 1 hour.

2Rinse thoroughly with clean water and allow the humidifier to air dry completely in a warm place (not in direct sunlight).

CAUTION:

Do not use bleach, chlorine-, alcohol-, or aromatic-based solutions on the air tubing or connector as these could cause some deterioration in the materials.

Do not hang the air tubing in direct sunlight as the tubing may harden over time and eventually crack.

Passover specifications

ResMed Passover refers to a unique solution within the realm of sleep and respiratory care, particularly aimed at improving the experience of users relying on Continuous Positive Airway Pressure (CPAP) therapy. This device is specifically designed to enhance the comfort and efficacy of CPAP treatment while integrating several advanced features and technologies.

One of the standout characteristics of the ResMed Passover is its lightweight and compact design. This makes it portable and easy to handle, which is especially beneficial for users who travel frequently. The innovative structure allows for minimal resistance, making it easier for the user to breathe naturally, thus promoting better adherence to therapy.

In addition to its streamlined design, the ResMed Passover incorporates advanced materials that facilitate natural moisture exchange. This feature is particularly important for users who might experience dryness in their airways due to the continuous airflow from the CPAP machine. By maintaining optimal humidity levels, the Passover system effectively alleviates discomfort, enabling users to enjoy more restorative sleep.

The Passover technology also boasts an integrated humidification system. This system is engineered to complement the CPAP therapy, ensuring that the user receives a consistent airflow enriched with moisture. The incorporation of this feature minimizes potential side effects, such as nasal congestion or throat irritation, which can discourage regular use.

Moreover, ResMed’s commitment to user experience is reflected in its quiet operation. The device is designed to operate with minimal noise, allowing for an undisturbed sleep environment, not just for the user but also for their sleep partners. This quiet functionality is critical in promoting a peaceful night's sleep, which is essential in the recovery process from sleep apnea.

Another important characteristic of the ResMed Passover is its user-friendly interface. It presents intuitive controls that make it easy for users to adjust settings based on their comfort and therapy needs. Monitoring and adjusting the device can be done seamlessly, fostering a better experience and encouraging ongoing compliance with therapy.

Overall, the ResMed Passover is a testament to the advancements in sleep therapy technology. By emphasizing comfort, efficiency, user-friendliness, and innovative design, ResMed continues to make a significant impact on the lives of individuals dealing with sleep apnea and other related respiratory issues. This thoughtful approach contributes to not just enhancing adherence to therapy but ultimately improving the quality of sleep and overall well-being.

fill line (as shown opposite).

Fill the humidifier with fresh

water every night.

Passover specifications