Maintenance and Care, Filter Maintenance

Maintenance and Care

Caring For Your SummerBreeze Zone Heater Cabinet

Clean the filter often for maximum performance (see filter maintenance, page 11). When necessary, wipe the cabinet clean with a soft cloth and/or furniture polish.

Storing Your SummerBreeze Zone Heater

When the heater is not being used for an extended period of time, follow these steps to extend the life and performance of the heater unit:

•Unplug the heater.

•Cover the heater to prevent dust from accumulating on or inside the unit.

•Store heater in a dry, low dust environment.

Note: Before resuming use of heater, ensure the filter and front grill are clean and clear of dust and dirt. Inspect the power cord to ensure no damage has compromised the integrity of the cord.

Suggestions for Best Performance

•Set your central heating system to a lower temperature. Place the zone heater in the area where you spend most of your time. Now set temperature on the zone heater to your comfort level.

•When heating larger areas, place the zone heater in a central location.

•Do not locate the zone heater in an area with a high air exchange rate. Heat produced should be contained in the room.

•Place the zone heater near a warmer inside wall and direct the output toward a cooler outside wall. The cooler outside wall will draw the generated heat toward it, which allows more efficient heating.

•Placing the zone heater next to a cold air return will draw the heat away from the area to be heated. Experiment with the placement of the heater to see what works best

for you.

•If the zone heater is used in an extremely dirty or dusty area, the filter should be cleaned more often to maintain the heater performance (see Filter Maintenance,

page 11).

Filter Maintenance

The only maintenance required for this zone heater is the periodic cleaning of the filter (located at the back of the unit). Vacuum or wash the filter at least once a month, or as dust becomes visible to ensure efficient operation of the heater.

•Turn the power off by pressing the on/off switch on the back of the heater to Off.

•Unplug the power cord from the electrical outlet.

•Remove the filter by gently pulling it straight out from the back of the heater.

•Clean the filter by vacuuming it until all dust and dirt is removed.

•Replace the filter by gently positioning it into the back of the heater.

•If filter is extremely dirty, run warm tap water over it until it is clean. Allow to dry completely, before replacing the filter back into the heater.

•Plug in the power cord and turn the power switch on the back of the heater to the on position.

		6	•
50	•	0	•	70
•				•
40				8
40				0
•				•
				F°

Electrostatic Filter

RSBH-SB, RSBHP-C, RSBH-O, RSBH-C, RSBHP-O specifications

The Riccar RSBHP-C, RSBH-SB, RSBHP-O, RSBH-C, and RSBH-O are part of Riccar's stellar lineup of high-performance vacuum cleaners, designed to cater to a variety of cleaning needs while ensuring ease of use and exceptional suction power. Each model boasts unique features and technologies, making them suitable for different environments and user preferences.

One of the standout features of these models is their lightweight design, which allows users to easily maneuver the vacuum around the home, ensuring a thorough clean even in hard-to-reach areas. The RSBHP series is equipped with a well-engineered swivel head, enhancing its flexibility and making it capable of navigating tight corners and furniture without much hassle.

The RSBHP-C model stands out with its powerful motor that provides robust suction performance. This model is particularly suitable for homes with pets, as it effectively removes pet hair and dander from carpets and upholstery. The HEPA filtration system in this model captures allergens and fine dust particles, promoting a healthier indoor environment.

The RSBH-SB, on the other hand, is tailored for those who prioritize compactness without sacrificing power. It is designed for effortless storage and offers a sleek aesthetic. Despite its smaller size, it incorporates advanced suction technology and has a durable brush roll that efficiently picks up dirt from various surfaces, including hardwood floors and carpets.

Similarly, the RSBHP-O and RSBH-O models boast optimized suction systems designed for varied cleaning tasks. These vacuums are equipped with tools and attachments such as crevice tools, dusting brushes, and upholstery nozzles, making them incredibly versatile. The ergonomic handle design in these models enhances user comfort, allowing for extended cleaning sessions without strain.

In terms of technology, all five models come with a user-friendly interface, ensuring that even those unfamiliar with vacuum cleaners can operate them with ease. The quick-release cord and easy-to-empty dust canisters further contribute to a hassle-free cleaning experience.

In summary, the Riccar RSBHP-C, RSBH-SB, RSBHP-O, RSBH-C, and RSBH-O vacuums embody a blend of functionality, design, and advanced technology. With features engineered for versatility, ease of use, and high performance, they represent Riccar's commitment to delivering superior cleaning solutions tailored to meet the needs of diverse households. Whether dealing with stubborn pet hair or maintaining pristine floors, any of these models can rise to the challenge, making them a valuable addition to your cleaning arsenal.