Cleaning and Sanitation

Installation & Service Manual

N5D, N5DH, N5DL, N5DSC

Component Removal and Installa- tion Instructions for Cleaning

Mirrors

1.Remove mounting screws and end mold- ing of mirror line-up.

2.Carefully grasp and lift mirror section until bottom edge clears the lower mirror track.

3.Carefully lower mirror out of upper mirror track and remove from case.

4.After cleaning, replace in reverse order.

Shelves and Shelf Brackets

1.Remove product from shelves.

2.If shelf has a light, unplug the light cord from the socket in the rear duct panel. Completely insert socket cover in the light socket to protect the receptacle.

3.Push shelves back and then lift up and out to remove them from the shelf brackets.

4.Remove shelf brackets from slots in rear uprights.

5.After cleaning, replace in reverse order.

Bottom Trays

1.Remove product from bottom of case.

2.Grasp and lift out each of the bottom trays from the case interior.

3.After cleaning, replace in reverse order.

Front Air Ducts

1.Remove lower trays, see this page.

2.Lift out front air duct sections.

3.After cleaning, replace in reverse order.

Rear Duct Panels

(w/o Shelf Light Sockets)

1.Remove shelves and bottom trays, see above.

2.Remove mounting screws and rear duct panels from case.

3.After cleaning, replace and secure rear duct panels in reverse order.

(with Shelf Light Sockets)

1.Remove mirrors, shelves and bottom trays, see this page.

2.Remove mounting screws from rear duct panel.

3.Slowly lift out rear duct panel until the shelf harness connector near the top of the panel can be accessed.

4.Disconnect shelf harness connector and complete removing the rear duct panel.

WARNING

Rear duct panels with electrical recepta- cles can be cleaned without removing the electrical receptacles. Do not get moisture on electrical wires when cleaning under this cover. Moisture on wires could cause premature product failure and/or personal injury or death from electrical shock.

5.After cleaning, reconnect the shelf har- ness connector: install the top socket assembly: replace and secure rear duct panels in reverse order.

Discharge Air Honeycomb

1.Loosen screws securing rear retainer plate.

NOTE

Note position of the honeycomb grid dur- ing removal so it can be reinstalled the same way.

2.Slide rear retainer plate back until the honeycomb grid sections can be removed from the top duct.

CAUTION

Improper installation of the honeycomb grid section could result in improper air flow and/or poor refrigeration.

3.After cleaning, replace honeycomb grid sections as they were removed and secure with the rear retainer plate and screws.

May, 2004

Page 15

N5DL, N5DSC, N5DH, N5D specifications

Tyler Refrigeration is renowned for its commitment to delivering high-quality commercial refrigeration solutions, and their N5 series units exemplify this dedication. The N5DSC, N5DH, N5D, and N5DL models are designed to cater to the diverse needs of the food service and grocery industries, providing reliable refrigeration for a wide variety of applications.

One of the standout features across the N5 series is their energy efficiency. Each model is engineered with advanced technology to minimize energy consumption while ensuring optimal cooling performance. This not only contributes to lower operational costs but also aligns with environmentally-conscious practices. The incorporation of high-efficiency compressors enhances cooling capabilities while reducing the overall carbon footprint.

The N5DSC is a vertical display case that takes pride in its aesthetically pleasing design, combining functionality with a modern look. Its glass front allows for excellent product visibility, encouraging impulse buys while maintaining temperature integrity. Equipped with LED lighting, the N5DSC showcases merchandise effectively, while its adjustable shelving provides flexibility for various product sizes.

The N5DH model is another notable variant with a focus on versatility and durability. Built with an emphasis on heavy-duty construction, it is ideal for high-traffic environments. The unit offers easy access and adjustable controls that enable operators to fine-tune temperatures according to specific needs, ensuring that products are stored under optimal conditions.

The N5D model is designed for more traditional applications, featuring robust build quality and a user-friendly interface. Its spacious interior allows for maximum product storage while maintaining efficient airflow, which is essential for consistent cooling across all items. This model is particularly suitable for back-of-house operations, ensuring that essentials are easily accessible without compromising refrigeration performance.

Lastly, the N5DL model is tailored for versatility in layout and design. It offers customization options that make it suitable for various configurations within stores or kitchens. Its energy-efficient technology and comprehensive cooling features ensure that companies can effectively manage their refrigeration needs while reducing their energy expenditures.

In summary, the Tyler Refrigeration N5 series, including the N5DSC, N5DH, N5D, and N5DL models, represent the pinnacle of commercial refrigeration technology. With features that prioritize energy savings, product visibility, durability, and versatility, they are essential assets for any business looking to optimize their refrigeration capabilities. These models not only enhance operational efficiency but also contribute to a visually appealing customer experience, setting establishments apart in a competitive market.