Cleaning and Sanitation

NSSD	Tyler Refrigeration

Component Removal and Installation Instructions for Cleaning

Shelves and Shelf Brackets

1.Remove product from shelves.

2.If shelf has a light, unplug the light cord from the socket in the rear duct panel. Completely insert socket cover in the light socket to protect the receptacle.

3.Push shelves back and then lift up and out to remove them from the shelf brackets.

4.Remove shelf brackets from slots in rear uprights.

5.After cleaning, replace in reverse order.

Bottom Trays

1.Remove product from bottom of case.

2.Grasp and lift out each of the bottom trays from the case interior.

3.After cleaning, replace in reverse order.

Front Air Ducts

1.Remove lower trays, see this page.

2.Lift out front air duct sections.

3.After cleaning, replace in reverse order.

Rear Duct Panels

(w/o Shelf Light Sockets)

1.Remove shelves and bottom trays, see above.

2.Remove mounting screws and rear duct panels from case.

3.After cleaning, replace and secure rear duct panels in reverse order.

(with Shelf Light Sockets)

1.Remove shelves and bottom trays, see above.

2.Remove mounting screws from rear duct panel.

3.Slowly lift out rear duct panel until the shelf harness connector near the top of the panel can be accessed.

4.Disconnect shelf harness connector and complete removing the rear duct panel.

WARNING

Rear duct panels with electrical recepta- cles can be cleaned without removing the electrical receptacles. Do not get moisture on electrical wires when cleaning under this cover. Moisture on wires could cause premature product failure and/or personal injury or death from electrical shock.

5.After cleaning, reconnect the shelf har- ness connector and replace and secure rear duct panels in reverse order.

Discharge Air Honeycomb

1.Loosen screws securing rear retainer plate.

NOTE

Note position of the honeycomb grid dur- ing removal so it can be reinstalled the same way.

2.Slide rear retainer plate back until the honeycomb grid sections can be removed from the top duct.

CAUTION

Improper installation of the honeycomb grid section could result in improper air flow and/or poor refrigeration.

3.After cleaning, replace honeycomb grid sections as they were removed and secure with the rear retainer plate and screws.

Front Lower Cladding

1.Remove front kickplate.

2.Lift and pull out front lower cladding until rear tabs clear holes in front of frame assembly. After rear tabs are clear, pull down on cladding to clear upper tabs from slots in bottom of upper front cladding and remove cladding from case.

Page 12

March, 2002

NSSD specifications

Tyler Refrigeration NSSD, a renowned name in the refrigeration industry, specializes in providing innovative solutions that meet the diverse needs of foodservice operators and retailers. The NSSD, or Non-Standard Size Display, is a product line designed to optimize product visibility and enhance merchandising capabilities while ensuring optimal temperature control for perishable items.

One of the standout features of the Tyler Refrigeration NSSD is its customizable design, which allows businesses to select configurations that best fit their specific space requirements and merchandising needs. Whether it’s a grocery store, gas station, or convenience store, the NSSD can be tailored to accommodate various product sizes, ensuring maximum product display and accessibility.

The NSSD employs cutting-edge technology to maintain the ideal temperatures necessary for keeping food products fresh and safe. With advanced refrigeration systems, including microprocessor controls, businesses can achieve precise temperature regulation that adapts to fluctuating environmental conditions. This technology not only improves energy efficiency but also helps reduce operational costs, a critical consideration in today's competitive market.

Another key characteristic of Tyler Refrigeration NSSD is its user-friendly interface. Operators can easily monitor and adjust temperatures, and the system can provide alerts for any anomalies, ensuring that merchandise remains within safe temperature ranges at all times. This feature improves product safety and longevity, enhancing the customer experience.

Durability is another hallmark of the Tyler Refrigeration NSSD. Built with high-quality materials, these units are designed to withstand the rigors of a busy retail environment. This longevity minimizes the need for frequent replacements and repairs, thereby providing a valuable return on investment for businesses.

In summary, Tyler Refrigeration NSSD combines customization, advanced technology, user-friendly operation, and durability to deliver an exceptional refrigeration solution. Its ability to fit into various retail environments while maintaining optimal temperatures makes it an ideal choice for businesses focusing on efficiency and product visibility. As the demand for quality refrigeration solutions continues to grow, Tyler Refrigeration remains at the forefront, providing innovative products that cater to the evolving needs of the foodservice and retail sectors.