U-Line B12115, B198, ADA151M manual Self-Closing Doors, 175 mm

Page 14

9 Self-Closing Doors

Door Alignment and Adjustment

Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior.

IMPORTANT

•Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket to ensure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door.

•The door will not be flush with the top of the cabinet. The top edge of the door will be 1/8 in. (3.175 mm) below the cabinet top.

1/8"

(3.175 mm)

To align and adjust the door:

1.Compare the top edge of the door (opposite the hinges) to the top edge of the cabinet and note the type (up or down) of adjustment needed.

1

2 3

2.Remove the top hinge pivot pin with a Phillips screwdriver and lift door off bottom hinge pin. Be careful not to lose the door closer insert sets.

3.Turn the door upside down and inspect the hinge plate mounting holes. The plate has slotted mounting holes. Loosen but do not remove the two hinge plate screws(1).

4.If door edge opposite the hinges needs to move up, move plate toward outside of door(2). If door edge needs to move down, move plate toward inside of door(3). Repeat until top edge of door is parallel with top of cabinet and tighten screws (1) securely.

4

5.After adjustment is complete, remove the door closers from the bottom hinge, clean thoroughly and apply petroleum jelly to the mating surfaces of the closers. Be sure that pins on closers align with holes in the door and bottom cabinet hinge plates. Mount door and install top hinge pivot pin.

Door Reversability

Location of the unit may make it desirable to mount the door on the opposite side of the cabinet.

Models with black and white doors are field-reversible.

Stainless steel models must be ordered right- or left-hand hinged.

Reversing the door

The Hinge hardware will be removed and reinstalled on the opposite side of the cabinet.

The top hinge hardware will be reinstalled on the bottom of the opposite side of the cabinet.

The bottom hinge hardware will be reinstalled on the top of the opposite side of the cabinet.

12

U-Line Self-Closing Door Alignment and Reversal

Page 13 Page 15
Image 14
Page 13 Page 15
Contents USE and Care Guide Introduction Read and save this Use and Care GuidePlease Record Your Model Information Table of Contents Line Use and Care Guide Safety Precautions Safety Alert DefinitionsGeneral Precautions Combo Models Feature Ice Makers FeatureADA15IM Model Features CO1175 and BI2115 Model FeatureControl Dial Air FlowInitial Startup Product OperationChecking Product Temperature Adjusting AirTemperatureAdjusting Ice Harvest To check the actual product temperature in the unitIce Maker Ice Maker AdjustmentIce Maker Operation Leveling Removing and Installing Interior ShelvesMaintenance Installing the grille Removing and Installing GrilleRemoving and Installing Door Shelves Reversing the door Door Alignment and AdjustmentDoor Reversability Standard DoorsInstall top hinge, and door Install bottom hingePrepare door for reinstallation For black or white doors Prepare door for reinstallationSelf-Closing Doors 175 mmReinstall Hole Plugs Reinstall hinge to bottom oppositeReinstall hinge to top opposite Install DoorCleaning Exterior CleaningInterior Cleaning DefrostingProduct Disposal Condensor CleaningStorage, Vacation and Moving Interval Every Six MonthsReplacement Parts Before Calling for ServiceIf Service is Required Troubleshooting GuideLine Corporation Limited Warranty He Built-In Undercounter Leader Since
Related manuals
Manual 19 pages 18.43 Kb

ADA151M, B198, B12115 specifications

U-Line is known for its innovative refrigeration solutions, and its lineup includes several standout models like the B198, B12115, ADA151M, WH95, and SS-98. Each of these models caters to different needs while maintaining the core qualities of efficiency, design, and performance.

The U-Line B198 is a versatile beverage center that comes equipped with features like dual-zone temperature controls, allowing users to store a variety of drinks at optimal temperatures. Its sleek design and stainless steel finish make it an elegant addition to any home or office space. The unit includes adjustable shelves and a glass door for easy visibility, which enhances the user experience by providing quick access to beverages.

Next in line is the U-Line B12115, a compact undercounter refrigerator ideal for spaces where efficiency and style must merge. This model is particularly noteworthy for its whisper-quiet operation, ensuring it won't disrupt the ambiance of your living or working environment. Its flexible shelving adjusts to accommodate different bottle sizes, from cans to wine bottles. The B12115 also features an LED interior light that brightens up the contents, making it easy to find what you need even in low light conditions.

The ADA151M is designed specifically to meet ADA (Americans with Disabilities Act) guidelines for accessibility, making it a perfect fit for modern kitchens and spaces that require compliance. This model offers customizable shelving options to cater to various storage needs and includes a frost-free operation system, which prevents ice build-up and promotes energy efficiency. The ADA151M combines functionality with a sleek design, featuring a stainless steel exterior that is both durable and stylish.

For outdoor enthusiasts, the U-Line WH95 is a fantastic choice, designed to withstand the elements while providing reliable refrigeration. This outdoor refrigerator features a weather-resistant construction, making it perfect for patios and outdoor kitchens. Its adjustable shelving and digital controls ensure easy temperature management, while the stainless steel finish enhances its aesthetic appeal.

Lastly, the SS-98 is a high-capacity refrigerator ideal for those who require ample storage space without compromising on style. It incorporates advanced cooling technology and energy-efficient features, allowing it to maintain optimal temperatures while minimizing electricity consumption. The SS-98 also includes a user-friendly interface, which simplifies temperature adjustments and monitoring.

In summary, U-Line's B198, B12115, ADA151M, WH95, and SS-98 models exemplify the brand's commitment to quality, functionality, and design. Each unit is equipped with advanced features that cater to diverse needs, whether for home or professional environments. By combining elegant aesthetics with practical technologies, U-Line continues to set the standard in premium refrigeration solutions.
Top Page Image Contents