Maintenance and Washing, Description Located

3.Open Filter access door and remove it. Also remove both collector cells or media filter and set aside being careful not to damage either.

4.Install eyebolts provided with unit as shown in Sketch A.

5.Select mounting location as near to the center of the area to be cleaned or at the point recommended by your TRION Representative. Remove a section of ceiling tile.

6.Attach a length of safety chain (2.0 Min.) or equivalent rod, cable or other hanger material to each of the four eyebolts. Fasten securely. See Sketch A.

7.Lift unit into place and support while securing to permanent ceiling, ceiling joist, etc. (See Sketch B)

CAUTION:

DO NOT ALLOW FULL WEIGHT OF UNIT TO REST ON T-BAR CEILING.

8.Install mounting trim brackets to each side to fill in the gap between the unit and T-Bar.

9.Connect electrical power to the unit. See Wiring Diagram.

10.If optional carbon filter is used, remove filter from plastic bag and install in the guide rails provided inside the cabinet behind the main filter. Replace the main filter and pre-filter / door assembly. Close the door and secure by turning the quarter turn fasteners clockwise with a coin or screwdriver. The unit is now ready for operation.

The following information will be required for prompt delivery of repair parts:

Description		Located
1.	Unit model number	Inside door
2.	Unit serial number	Inside door
3.	Part number and description	Exploded views.

When a part number is not listed, give the above information and include the item number from the exploded views.

MAINTENANCE AND WASHING

MAINTENANCE

When to Wash: Periodically the dirt collected by your unit must be removed. The frequency of washing will depend on the amount of dirt present in the air in your locality.

The washing frequency best suited for your unit can be determined by examining the dirt collected components at three week intervals. As the dirt begins to collect, you

FM 1000 specifications

Trion FM 1000 is an innovative and robust air filtration system designed for commercial and industrial applications. This advanced solution aims to enhance indoor air quality, providing a healthier environment in workplaces, manufacturing facilities, and other enclosed spaces. Its state-of-the-art features make it a standout choice for businesses prioritizing employee well-being and operational efficiency.

One of the most notable features of the Trion FM 1000 is its highly efficient filtration system. It employs a multi-stage filtration process, which includes pre-filters, high-efficiency particulate air (HEPA) filters, and activated carbon filters. This combination effectively captures a wide range of airborne contaminants, including dust, allergens, smoke, and volatile organic compounds (VOCs). The HEPA filters, in particular, have a remarkable efficiency rating, capturing up to 99.97% of particles down to 0.3 microns in size, ensuring that the air in the facility remains clean and safe to breathe.

In addition to its filtration capabilities, the Trion FM 1000 incorporates advanced air circulation technologies. Its powerful fans are designed to optimize airflow, facilitating the rapid circulation of purified air throughout large spaces. This ensures that contaminants are continuously removed, providing a consistent and refreshing atmosphere. The system also features adjustable fan speeds, allowing users to customize the airflow according to their specific needs.

Another significant characteristic of the Trion FM 1000 is its user-friendly design. The unit is equipped with an intuitive control panel that allows for easy operation and monitoring. Users can easily check filter status, adjust settings, and receive alerts when it’s time for maintenance or filter replacement. This proactive approach to upkeep helps to extend the life of the unit and maintain optimal functionality.

Furthermore, the Trion FM 1000 is built with durability in mind. Constructed with high-quality materials, it is designed to withstand the rigors of industrial environments while maintaining peak performance. Its compact design enables easy integration into various settings without taking up excessive space.

Overall, the Trion FM 1000 stands out as an effective solution for enhancing indoor air quality. With its advanced filtration technologies, efficient air circulation, user-friendly interface, and durable construction, it is an excellent investment for any business aiming to promote a healthier work environment while ensuring compliance with air quality standards.