Backup Battery Replacement

This alarm uses a 9 Volt Alkaline battery. The battery should last for at least one year under normal operating conditions. The alarm has a low battery indicator, an audible "beep." It will operate at 30- 40 second intervals for a minimum of 7 days. When this indication occurs, replace the battery with an Alkaline type (Eveready Energizer #522, Duracell #MN1604), or Lithium type (ULTRALIFE U9VL- J), from your local retailer. Use the convenient QUICK DRAWTM pull-out battery drawer for easy battery replacement.

Slide the QUICK DRAWTM pull-out battery drawer open and remove the battery. While observing polarity, push the replacement battery into the battery drawer until it is held securely in place. Carefully close the QUICK DRAWTM pull-out battery drawer.

Use only the batteries specified. Use of different batteries may have a detrimental effect on the alarm. The constant exposures to high or low temperatures or high humidity may reduce battery life.

When battery door is open, the battery will not power the alarm even if the battery is properly installed.

Do not attempt to repair this combination alarm. Doing so will void your warranty.

REPAIRS AND SERVICES

The smoke alarm contains less than 1 microcurie (37 kilobecquerel) of Americium 241, a radioactive material. The distribution of these ionization type smoke alarms is licensed by the U.S. Nuclear Regulatory Commission; the consumer is exempt from any licensing or requirements. If the smoke alarm is defective in any way, do not tamper with the unit. Return the unit for servicing. (See warranty for instructions or in-warranty returns.) There will be a service charge for repairing out of warranty units.

NATIONAL FIRE PROTECTION ASSOCIATION REQUIRED PROTECTION

For your information, the National Fire Protection Association's Standard 72, reads as follows:

“11.5.1 One- and Two-Family Dwelling Units. 11.5.1.1 Smoke Detection. Where required by applicable laws, codes, or standards for the specified occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms. Exception: Smoke alarms shall not be required in sleeping rooms in existing one- and two-family dwelling units. (2) Outside of each separate sleeping area, in immediate vicinity of the sleeping rooms. (3) On each level of the dwelling unit, including basements. Exception: In existing one- and two-family dwelling units, approved smoke alarms powered by batteries are permitted.

“A.11.8.3 Are More Smoke Detectors Desirable? The required number of smoke detectors might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke detectors. For this reason, it is recommended that the householder consider the use of additional smoke detectors for those areas for increased protection. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not protected by the required smoke detectors. The installation of smoke detectors in kitchens, attics (finished or unfinished), or garages is not normally recommended, as these locations occasionally experience conditions that can result in improper operation.”

The equipment should be installed using wiring methods in accordance with the National Fire Protection Association’s Standard 72, Chapter 11. (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269).

THIS PRODUCT IS LISTED TO UL STANDARD FOR SAFETY,

UL217 6TH, BY UNDERWRITERS LABORATORIES

Page 8

CD-9775 specifications

Universal Electronics CD-9775 is an advanced universal remote control designed to enhance the user experience for managing multiple electronic devices in a home theater setup. With its ergonomic design, intuitive functionality, and cutting-edge technology, the CD-9775 stands out as a reliable choice for users seeking convenience and versatility.

One of the main features of the CD-9775 is its compatibility with a wide range of devices, including TVs, sound systems, streaming media players, and other home entertainment gadgets. This extensive compatibility enables users to control multiple devices using a single remote, simplifying the operation of complex setups.

The CD-9775 incorporates a user-friendly interface with a clear display, allowing for easy navigation and access to various functions. The layout of the buttons is designed for comfort and efficiency, ensuring that users can quickly find the controls they need. In addition to standard remote functionalities, such as power on/off and volume control, the CD-9775 offers programmable buttons that can be customized for specific functions or presets, further enhancing the user experience.

Another significant technology integrated into the universal remote is the SmartScan feature, which allows the CD-9775 to automatically search for and program compatible devices. This saves time and effort compared to manual programming, making it accessible even for those who may not be tech-savvy. The device also supports advanced features like macro programming, which enables users to create sequences of commands with a single button press, streamlining the control of multiple systems.

The CD-9775 boasts long battery life, thanks to energy-efficient design and low-power consumption technology. This ensures that users can rely on their remote without frequent battery replacements, making it a practical choice for daily use.

Overall, Universal Electronics' CD-9775 combines functionality, ease of use, and advanced technology in a sleek package. Its ability to control various devices, user-friendly interface, and innovative features make it a valuable addition to any home entertainment system. For anyone looking to simplify their home theater experience and enjoy seamless control over their electronic devices, the CD-9775 is definitely worth considering.