Universal Electronics 975 Check Thermostat Operation Cooling System, Resetting Thermostat

Page 24

CHECK THERMOSTAT OPERATION

COOLING SYSTEM

!WARNING

To prevent compressor and/ or property damage, if the outdoor temperature is below 50°F (10°C), DO NOT operate the cooling system.

1.Press SYSTEM until COOL is displayed.

2.Press to adjust thermostat setting below room temperature. The fan should come on (after the fan-on delay time, if any), followed by cold air circulation.

3.Press to adjust temperature setting above room temperature. The cooling system should stop operating, and the fan should stop running (after the fan-off delay time, if any).

RESETTING THERMOSTAT

The thermostat can be reset back to factory default programs and configuration options. Removing power from the thermostat will not reset it to the default settings. Before resetting the thermostat, you may want to make note of the previously selected configuration options and programming.

To reset the thermostat, press and release PROGRAM RUN , then press the FAN , TIME BACK and buttons at the same time. This will reset the thermostat to factory default programs and configuration. The display will momentarily go blank, then all segments on the display will momentarily be shown. The thermostat will then go into the

22

HOLD mode and will maintain factory preset temperatures.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Series Easy, Menu-Driven Set-Up Programming Introduction Orientation Thermostat ButtonsDisplay Installation SpecificationsDescription Electrical DataPrecautions Installation Remove OLD ThermostatAttach Base to Wall Configuring Programming Mounting screws . Thermostat base and terminalsWiring Diagrams From heating system From 24 VAC transformerRC RH Typical wiring diagram for millivolt system Installation Wiring Diagrams MV W RH RC G Y O B 3 4 Configuration Jumpers Jumper locationsConfiguration Menu CommentsTime FWD Configuration Installer Selectable Energy Management RecoveryAdjustable Anticipation Programmable Cool FAN-ON and FAN-OFF Delay Heating CoolingConfiguration Optional Remote Temperature SenseCompressor Lockout Disabling HEAT, Cool or Auto ModesCheck Thermostat Operation FAN OperationHeating System Resetting Thermostat Check Thermostat Operation Cooling SystemConfiguration SettingStep Press Buttons Displayed Factory Default Press To select Adjusts temperature display higher or lower Programming Settings for time and temperature Day Sample Heat Program Schedule Shows factory programming Day Sample Cool Program Schedule Shows factory programming Day Personal Heat Program Schedule Day Personal Cool Program Schedule Features Large Lighted Liquid Crystal Display LCDSetpoint Range 45-99F 7-37C Adjustable Temperature Display Factory Preprogrammed Times and TemperaturesArm Chair Programming Programmable Fan ControlAir Filter Change-Out Indicator Temporary Program OverrideThermostat Startup After Total Power Loss Indefinite Program HoldProgrammable Vacation Time/ Temperature Operation Daylight Savings Time ButtonKeypad Lockout Battery Back-Up System Thermostat DiagnosticsCompressor Short-Cycle Protection Index Page Page Part no -6438A

975 specifications

Universal Electronics 975 is a cutting-edge remote control solution designed for enhancing user experience in home entertainment systems. This versatile device is engineered to provide seamless integration and ease of use for various electronic devices, making it a popular choice for both consumers and industry professionals.

One of the standout features of the Universal Electronics 975 is its universal compatibility. This remote supports an extensive range of devices including televisions, DVD players, Blu-ray players, soundbars, and streaming devices, offering users the convenience of controlling multiple devices with a single remote. The remote's ability to function with different brands adds a layer of flexibility that customers appreciate.

Incorporating advanced technology, the Universal Electronics 975 utilizes infrared (IR) signals to communicate with various devices. Additionally, the remote supports radio frequency (RF) technology for devices that require it, ensuring reliable operation without the need for line-of-sight visibility. This is particularly beneficial for users who may have their devices placed in cabinets or behind other furniture.

The remote is equipped with a user-friendly interface, featuring a clear layout of buttons that are intuitive for users of all ages. The device includes dedicated keys for frequently used functions, such as power, volume, and channel control, allowing for quick access without navigating through multiple menus. The backlit keys further enhance usability in low-light environments, making it easy to operate the remote without distractions.

Another key characteristic of the Universal Electronics 975 is its programmable functionality. Users can customize the remote to learn commands from other remotes, ensuring that it can handle various devices even if they are not directly supported out of the box. This customization capability is a huge benefit for tech-savvy users and enhances the remote’s longevity as home entertainment systems evolve.

The 975 model also boasts energy efficiency, designed to conserve battery life for prolonged usage. The remote typically requires standard AAA batteries, which are widely available and easy to replace.

In summary, the Universal Electronics 975 stands out in the competitive remote control market with its universal compatibility, advanced IR and RF technologies, user-friendly interface, and customizable functionality. It provides an efficient and convenient solution for managing multiple devices, making it an essential tool for modern home entertainment setups.
Top Page Image Contents