Ryobi P710 manual Charging a HOT Battery Pack, To Install Battery Pack, To Remove Battery Pack

Page 11

OPERATION

CHARGING A HOT BATTERY PACK

When using the tool continuously, the batteries in the battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the green LED to come on instead of the red LED. After 30 minutes, reinsert the battery pack in the charger. If the green LED continues to remain on, return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing.

NOTE: This situation only occurs when continuous use of the tool causes the batteries to become hot. It does not occur under normal circumstances. Refer to “CHARGING A COOL BATTERY PACK” for normal recharging of batter- ies. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Ryobi Authorized Service Center for electrical check.

TO INSTALL BATTERY PACK

See Figure 3.

nPlace the battery pack in the hand vac. Align the raised rib on the battery pack with groove in hand vac’s battery port.

nMake sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the hand vac before beginning operation.

CAUTION:

When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the tool and latches into place properly. Improper installa- tion of the battery pack can cause damage to internal components.

TO REMOVE BATTERY PACK

See Figure 3.

nLocate the latches on the side of the battery pack and depress both sides to release the battery pack from the hand vac.

BATTERY

PACK

P110

CHARGER

 

RED LED

 

GREEN

YELLOW LED

LED

 

 

Fig. 2

BATTERY PACK

LATCHES

Fig. 3

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsSpecific Safety Rules General Safety RulesSpecific Safety Rules Safety Rules for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Crevice Tool Product SpecificationsSwitch Know Your WET/DRY VacuumPacking List AssemblyUnpacking Applications Charging the Battery PackCharging a Cool Battery Pack OperationTo Remove Battery Pack Charging a HOT Battery PackTo Install Battery Pack WET Vacuuming STARTING/STOPPING the VacuumAdding Attachments MaintenanceGeneral Maintenance Replacing the Filter Cleaning the Hand VACRemoving and Cleaning the Filters Removing the Dust BowlBatteries Battery Pack Removal Preparation for RecyclingReattaching the Dust Bowl Service Model NO. and Serial no

P710 specifications

The Ryobi P710 is a versatile and powerful portable job site radio that caters to the needs of both professionals and DIY enthusiasts. This compact unit is packed with features designed to enhance productivity and provide entertainment while working on various tasks.

One of the standout features of the Ryobi P710 is its impressive Bluetooth connectivity. With the ability to connect to compatible devices up to 30 feet away, users can easily stream their favorite music, podcasts, or other audio directly from smartphones and tablets. This feature makes it an ideal companion for work sites, where entertainment can help keep morale high during long hours.

The P710 radio also supports USB charging, providing users with the convenience of charging their devices directly from the radio. This is especially beneficial when working outdoors or in areas where power outlets are scarce. The built-in battery is designed for extended use, ensuring that your music or talk shows last throughout the day without interruption.

Another key characteristic of the Ryobi P710 is its durable design. Constructed with rugged materials, this radio is built to withstand tough job site conditions. Its reinforced corners and water-resistant casing protect it from the elements, making it suitable for outdoor use. Additionally, the integrated handle and lightweight design make it easy to transport from one location to another.

The sound quality of the P710 is another highlight, featuring high-performance speakers that deliver clear audio whether at low or high volumes. The radio also includes AM/FM tuners, allowing users to access a wide range of broadcasting options. With easy-to-use controls and a backlit display, adjusting settings is a straightforward process, even in low-light conditions.

Furthermore, the Ryobi P710 is compatible with the Ryobi 18V ONE+ battery system, which means it can be powered by any Ryobi 18V battery for added convenience. This compatibility allows users to utilize batteries they may already have from other Ryobi tools, reducing the need for additional gear.

In summary, the Ryobi P710 is a robust job site radio that offers Bluetooth streaming, USB device charging, and exceptional durability. With high-quality sound and compatibility with the Ryobi 18V system, it stands out as a must-have tool for those needing entertainment and practicality while on the job. Its well-thought-out design, portability, and excellent functionality make it a worthwhile investment for workers in various industries.
Top Page Image Contents