Operation 8010
Temperature
Control Low Battery
indicator
50 | 60 | 70 | 80 | 90 |
|
| |||
|
|
|
Once you have installed the thermostat, follow the instructions below to operate your new thermostat.
1Configure
ïSet HEAT/COOL mode switch to HEAT or COOL. Set the Fan switch to AUTO (automatic).
Thermometer |
|
|
Fan | HEAT/COOL | |
Switch | Mode Switch | |
|
| |
Statement of use: The GPMG8010 can be used with most |
| |
24 volt gas, oil or electric heating systems, zoned heating |
| |
systems, heat pumps with or without auxiliary heat, or gas | PG 1 | |
millivolt heating systems. It cannot be used with 120 volt | ||
heating systems. |
| |
|
| |
2Set Temp
Turn the Temperature control to select the desired temperature.
ïWarmer - to the right
ïCooler - to the left.
ENGLISH
3 Operate | COOLER | |
WARMER | ||
|
Your thermostat is now in operation.
ïIn the winter, set the system switch to HEAT to control your heating system.
ïIn the summer, set the system switch to COOL to control your air conditioner.
ïIn spring and fall or when windows are open, you can set the system switch OFF.
ïSetting the FAN switch to AUTO automatically runs your system's fan during heating and cooling.
ïSetting the FAN switch to ON runs your system's fan continuously even without heating or cooling.
NOTE: LED blinks when batteries are low.
Caution: System will stop when batteries die.
50 | 60 | 70 | 80 | 90 |
|
| |||
|
|
|
|
PG 2