ritetemp 8035C manual Remove old unit, Attach labels enclosed to each wire for identification

Page 3
Base
Wall Plate
3 Mount the 8035C

2 Remove old unit

PG 3

ïSwitch electricity to the furnace and air conditioner OFF; then proceed with the following steps.

ïRemove cover from old thermostat. Most are snap-on types and simply pull off. Some have locking screws on the side or front. These must be loosened. Note the letters printed near the terminals.

ïAttach labels (enclosed) to each wire for identification.

Read instructions carefully before removing any wiring from existing

Caution thermostat. Wires must be labeled before they are removed. THERE IS NO STANDARD COLOR CODE. When removing wires from their terminals, ignore the color of the wires since these may not follow any standard.

ïLabel the wires one at a time. You must have all the wires labeled before you proceed. With all wires labeled, remove them from the old unit.

ïMake sure the wires do not fall back inside the wall.

Wind them around a pencil to keep them from falling. Loosen all screws on the old thermostat and remove it

from the wall.

R

 

ïFill wall opening with non-combustible insulation to prevent drafts.

G

W

ïSeparate front from back of unit. Press up on the

MENU

 

catch on bottom of thermostat and swing the body

PROG

 

away from the base, lift up to remove the body

 

from the base. Hold the base against the wall, with

 

the wires coming through the opening below the

 

terminal block.

 

RESET

 

 

ïPosition the base for best appearance. (If you

 

chose to use the optional wall plate, hold the wall

 

plate against the wall, with the wires coming through the

 

opening. Then pull the wires through the opening in the

 

base unit. Position the base unit for best appearance.)

 

ïAttach the base to the wall with the three screws

 

provided.

 

 

If you are mounting the base to sheet rock or if you are

 

using the old mounting holes, use the plastic anchors

A

provided. Drill a 3/16-in.(4.8mm) hole for the insert at

 

each screw location, then mount the base.

Terminal

 

 

Block

 

PG 4

Image 3
Contents Install guide 8035C Tools Location U T I O NRemove old unit Attach labels enclosed to each wire for identificationPlease be aware of the following power options 8035C can run on the C wire if available.24VAC only8035C can run on batteries only AA Alkaline What Wires Do You Have? Check Unit To check Heat modeTo check Cool mode REMEMBER, Mode Switch must be in Heat or Cool to operateOr R Remove the red This connects the Compressor 8035C Features

8035C specifications

The Ritetemp 8035C is a cutting-edge programmable thermostat designed to enhance comfort while maximizing energy efficiency in residential settings. This intuitive device offers a range of features that cater to both user convenience and effective climate control.

One of the standout characteristics of the Ritetemp 8035C is its user-friendly interface. The large, easy-to-read digital display allows homeowners to quickly monitor and adjust temperature settings. With a simple touch of a button, users can navigate through various programming options, making it straightforward to set schedules that correspond with their daily routines.

The Ritetemp 8035C supports a 7-day programmable schedule, enabling users to customize heating and cooling settings for each day of the week. This flexibility ensures that energy usage is optimized, as the thermostat can be programmed to lower or increase temperatures during the night or when the home is unoccupied. This feature not only leads to comfort but also helps in reducing energy bills.

In terms of compatibility, the Ritetemp 8035C is versatile, as it works with both heating and cooling systems, including conventional and heat pump systems. This broad compatibility makes it an excellent choice for a variety of home heating and cooling set-ups.

The Ritetemp 8035C also boasts a built-in battery backup. This feature ensures that the thermostat maintains its settings during power outages, eliminating the need for reprogramming once the power is restored.

Another notable technology incorporated in the Ritetemp 8035C is its Smart Response technology. This innovative feature learns the user’s heating and cooling cycles to provide more efficient temperature control. By anticipating the user’s needs, it can adjust settings to ensure the desired comfort level is reached by the programmed time, effectively reducing energy consumption.

Beyond its technical capabilities, the Ritetemp 8035C is designed with aesthetic appeal in mind. Its sleek, modern design allows it to blend seamlessly into any home décor.

In summary, the Ritetemp 8035C is not just a thermostat but a comprehensive climate control solution that enhances comfort, promotes energy savings, and embraces modern design. Its programmable features, compatibility with various systems, and intelligent technology make it an ideal choice for homeowners seeking both functionality and ease of use.