ritetemp 8030C manual Configure, Press Menu to configure the thermostat Set day of the week

(from HOME screen).

1 Configure

Press MENU to configure the thermostat Set day of the week -

Touch the Day of the week area to cycle through

the days of the week to select the current day.

Set time of day -
Touch the Time of Day arrows to move the time
selection forward or backward until it displays the	Backward Forward
current time. Touch and hold for faster setting.

Set oC -oFdisplay

Touch the oF and it will toggle to oC.

Set audible chirp -

Touch the the musical note icon to select the chirp or no chirp.

Return HOME by touching the home icon. 5

PG

2Auto-run

This Thermostat comes preprogrammed with an Energy- StarTM approved program. This program is recommended by the EPA for energy efficiency.

We strongly recommend that you Auto-Run this program for one week, and see if it works for you. If it does not fit your needs you can always input a custom program.

To Auto-Run the Energy-StarTMprogram, select HEAT or COOL with the mode switch. The unit is now running the Energy-StarTMprogram.

The clock is displayed on the left. The ambient temperature is displayed in the the center of the LCD touch screen. The TIME SLOT icon indicates the TIME SLOT active in the Energy-StarTmprogram.

The programmed temperature is shown on the lower right. For program details refer to the Energy-StarTMprogram chart below.

HEAT	MORN	DAY	EVEN	NITE	COOL	MORN	DAY	EVEN	NITE
	6:00am	8:00am	6:00pm	10:00pm		6:00am	8:00am	6:00pm	10:00pm
All Days	70oF	62oF	70oF	62oF	All Days	78oF		85oF	78oF

PG 6