
Wiring
Important - Because of the motorized doors, wiring the HV is different than a normal ON/OFF fan. Please follow the instructions carefully. Be sure to turn off power before wiring the HV Whole House Fan It is recommended that the wiring of the HV be done by a licensed electrician.
The HV requires a constant source of power. Because the doors are motorized, they need power to open and power to close. The fan operation is controlled internally.
HV1000
There are three wires in the electrical box: WHITE, RED, and BLACK.
• Connect the WHITE wire to Line Neutral
• Connect the RED wire to Line Hot
• Connect the BLACK wire to a Switched Hot Feed
When 115 VAC Hot is applied to it, the doors will open. When 115 VAC Hot is removed, the doors will close.
• Connect the ground wire to the screw in the electrical box
Drawing is not to scale
The HV whole house cooling fans are not for use with solid state speed controls
A Remote Control Kit for the HV1000 is available and may be purchased separately. Installation is quick and easy and it may be installed at any time.
Care
All the motors in the HV are permanently sealed and do not require oiling. To keep dirt, dust and debris from the fans we recommend that you periodically remove the grille from within the living space and dust the fan blades. Please remember to make sure that the fan is OFF before dusting the fan blades.
Specifications
Voltage ……………………………. 115VAC 60 Hz
Power
HV1000…………..…....... 112 Watts
HV1600…………..…....... 276 Watts
Airflow @ .03” (System)
HV1000 …………...……. 1000 CFM
HV1600 High……..……. 1600 CFM
HV1600 Low …………… 900 CFM
|
| |
HV1000 & | ||
Weight |
|
|
HV1000…………………. | 17 | Lbs. |
HV1600………………… | 21 | Lbs. |
Rough Opening…………………… | 14 | ½” x 22 ½” |
Grille Dimensions…………………. | 15 | ¾” x 25 ¾” |
Grille Color ………………………... White