Sanitaire S634 warranty HOW to Assemble

Page 3

HOW TO ASSEMBLE

CAUTION: Completely assemble vacuum cleaner before using.

Handle styles may vary. One handle has four snap pins on the back side of the handle, the other handle has two snap pins on each side. The cord hooks may be different.

Assembly Packet

A - CONNECTOR

B -

C - 2-PART D - BAG

FASTENER

BOLT

SCREWS

Step 1

Handle Connector

Push connector A into the upper handle and align holes. One connector, shown, is fl at on one side and the 4 pins snap into one side. The connector in Detail A has 2 snap pins on each side and alignment tabs that slide into the handle.

B

Step 2

FastenerA

Push fastener B into a hole and apply thumb pressure so fastener snaps into position. Secure second B fastener. Repeat steps 1 and 2

to complete the assembly of the handle. See Detail B.

E

C –

Tab

Detail A

Detail B

Step 3

Handle Socket

Push handle into handle socket E so handle grip curves away from the cleaner. Align the holes, insert the 2-part bolt C and tighten.

Step 4

Outer Bag

Hold outer bag with zipper away from handle. Important:

To provide a good gasket seal, the bag coupling must seat firmly against the motor base and not overlap the furniture guard. Start the bag screws D by hand, then tighten

with a screwdriver.

Step 5

Bag Support

Loop the spring F onto the bag support G, located to the back of the upper cord hook.

G

Upper

Guide Upper Cord

Hook

F

E

 

C–

Lower Cord

 

Hook

D

Step 6

Cord Storage

Secure the cord in the guide below the upper cord hook as shown or secure the cord into the side of the upper cord hook.

Secure cord into lower cord hook. Pull up on cord to tighten but leave slack near the base so the cord does not strain when the handle is lowered for use. Wrap the cord around the cord hooks. Fasten the plug to the cord to prevent unwinding.

3

Image 3
Contents En Mexico llame al 55 Please RetainUSA Mexico 55 Canada Service InformationIndex General InformationHOW to Assemble HOW to Maintain How To UseCleaner Care How To Replace a Worn Belt, Style RD PN 52100AHow To Replace a Worn Belt Brush RollHeadlight Bulb Standard on most models, PN 40009A USA Canada Sanitaire Limited Warranty

S634 specifications

The Sanitaire S634 is a commercial-grade upright vacuum cleaner designed specifically to meet the rigorous demands of professional cleaning environments. Built with a focus on durability and high performance, the S634 is an ideal choice for offices, schools, and other facilities requiring reliable maintenance.

One of the standout features of the Sanitaire S634 is its powerful motor, delivering up to 7 Amps of suction power. This robust motor ensures efficient cleaning, allowing the machine to tackle both carpets and hard floors with ease. The vacuum’s high-speed brush roll spins at an impressive 5,600 RPM, enabling it to effectively agitate dirt and debris, ensuring thorough cleaning results.

The Sanitaire S634 is equipped with a reinforced handle and a lightweight design, making it easy for cleaning staff to maneuver and transport. Weighing only around 8 lbs, it minimizes operator fatigue during extended use, allowing for more efficient cleaning throughout large areas.

Another key feature is the S634's multi-layer filtration system. This advanced technology captures fine dust and allergens, promoting a healthier indoor environment. Its easy-to-remove vacuum bags have a high-capacity design, offering a significant increase in dirt retention while reducing the frequency of bag changes, thus optimizing operational efficiency.

The vacuum comes with a variety of attachments that enhance its versatility. The extension wand and tools facilitate cleaning in hard-to-reach areas, such as corners and behind furniture, ensuring comprehensive coverage. Additionally, the S634 features an adjustable height setting, allowing it to adapt seamlessly to various carpet heights for effective cleaning across different surfaces.

In terms of durability, the Sanitaire S634 is constructed with built-to-last materials, ensuring it can withstand the rigors of daily commercial use. With a sturdy, bump-resistant exterior and solid components, this vacuum is designed for long-lasting performance.

Furthermore, the S634 operates at a low noise level, making it suitable for daytime cleaning in noise-sensitive environments. This combination of performance, efficiency, and quiet operation makes the Sanitaire S634 an outstanding option for any commercial cleaning operation seeking reliable and effective carpet and floor care. Overall, the Sanitaire S634 stands out as a top performer in the realm of commercial vacuum technology, providing excellent cleaning results while being user-friendly and durable.