Sanitaire SC5800 Series warranty Routine Maintenance, Periodic Maintenance

Page 9

ROUTINE MAINTENANCE (continued)

Pre-Motor

Filter

Pre-Motor Filter

Check the pre-motor filter each time the dust bag is changed. Clean or replace as needed.

To Clean Pre-Motor Filter

1.Remove filter centered in the bottom of the bag compartment.

2.Shake filter to remove excess dust. If necessary, the filter can be cleaned by vacuuming with another cleaner or washing with mild detergent.

3.Reinstall filter after completely dry.

Use GENUINE EUREKA replacement pre-motor filter, Part No. 71480.

Models equipped with Cartridge Filter (Only

cartridge style filters can be used with these models.) Check the True HEPA filter each time dust bag is changed. Replace twice a year or as needed.

True HEPA Cartridge

Latch

Filter Door Latch

To remove True HEPA cartridge filter

1.Push down on filter door latch and pull door away from cleaner.

2.Push down on HEPA cartridge latch and remove filter.

To replace True HEPA cartridge filter

1.Place bottom tabs of filter cartridge into slots. Rotate filter toward cleaner, press firmly against cleaner to latch.

Make sure True HEPA cartridge latch is secured on both sides.

2.Replace filter door by placing tabs of door into slots on cleaner. Rotate door up and against cleaner until it locks into place.

NOTE: To have the benefit of a sealed True HEPA system, you must use one of the True HEPA cartridge filter systems.

Use GENUINE EUREKA replacement True HEPA filter, HF5.

How To Clean Filters

1.Remove from cleaner.

2.To remove debris, tap filter against waste container or brush off.You may also vacuum the filter using a different cleaner. If filter needs further cleaning, wash in warm water using a mild detergent. To clean between filter pleats, fan open under running water.

3.When all parts are completely dry, follow the above steps in reverse to reassemble.

NOTE:Do not put any parts in a dishwasher. NOTE:Your washable filter may need to be replaced if

cleaning it does not restore cleaning performance.

Be sure to use GENUINE EUREKA replacement filters.

PERIODIC MAINTENANCE

How To Change Light Bulb (Only for models with a

headlight)

NOTE: Turn off the power switch and disconnect the electrical cord before changing light bulb.

1.Lower handle. Remove the screw from lens cover.

2.Pull lens cover from cleaner.

3.Pull old light bulb out of socket.

4.Push new light bulb into socket.

5.Replace lens cover.

6. Secure with screw.

Use GENUINE EUREKA replacement light bulb, Part No. 57940-2.

9

Image 9
Contents OWNER’S Guide General Information Service InformationThermal Cut Off USA 1-800-800-8975 Mexico CanadaConseils DE Sécurité Warranty Registration What this Warranty does not CoverObtaining Warranty Service Servicing of DOUBLE-INSULATED AppliancesHelpful Information Quick ReferenceStore Hose and Accessories HOW to AssembleAttach Handle Attach HosePlace desired accessory onto end of hose or wand HOW to USENested extension wands to add reach Hose or WandInstalling New Dust Bag Routine MaintenanceReinstalling the Dust Bag Cover Removing the Dust Bag Style LSPeriodic Maintenance Routine MaintenanceBrush Roll How To Replace Brush Roll BeltBrush Roll Belt, Style U Hood Motor Shaft Belt Brush RollTo Clear Blockages in Hose Problem SolvingLower HoseProblem Solution

SC5800 Series specifications

The Sanitaire SC5800 Series is a powerful commercial vacuum cleaner engineered for superior performance in a variety of cleaning applications, particularly suited for hotels, schools, and offices. This vacuum is designed to meet the rigorous demands of commercial use while ensuring ease of operation and maintenance.

One of the standout features of the SC5800 Series is its robust construction. Built with durability in mind, the vacuum's high-impact plastic body can withstand the rigors of daily use while being lightweight enough to facilitate ease of maneuverability. The unit's ergonomic handle provides a comfortable grip, making it simple to transport across different surfaces without causing strain on the user.

The SC5800 Series employs a high-efficiency motor that generates powerful suction, ensuring thorough cleaning on both carpets and hard floor surfaces. This motor is designed to operate quietly, making it ideal for environments where noise reduction is critical, such as libraries and classrooms.

Equipped with an innovative filtration system, the SC5800 effectively captures fine dust and allergens, contributing to better air quality in enclosed spaces. The vacuum comes with a disposable dust bag that is easy to replace, allowing for hassle-free maintenance and ensuring that dirt and debris are contained securely.

Another significant aspect of the SC5800 Series is its versatile cleaning capabilities. It features adjustable height settings that allow users to switch between different flooring types with ease. The inclusion of a variety of attachments, such as crevice tools and upholstery brushes, enables comprehensive cleaning of diverse surfaces, from narrow gaps to delicate fabrics.

The SC5800 is also designed for efficiency. With a generous capacity dust bag, it minimizes downtime for bag changes, allowing for extended cleaning sessions. Additionally, the vacuum boasts a long power cord, reducing the need for constant re-plugging during operation.

In conclusion, the Sanitaire SC5800 Series stands out as an exceptional choice for commercial cleaning. With its robust design, powerful suction, advanced filtration, and versatile attachments, it meets the rigorous demands of frequent use while promoting a cleaner and healthier environment. Ideal for a range of industries, this vacuum offers longevity and performance that professionals can rely on.