Sanitaire 6000 warranty Brush and PAD Driver Installation, Adjustments, Drive Belt Adjustment, Off

Page 5

BRUSH AND PAD DRIVER

INSTALLATION

CAUTION: Disconnect the power cord from the electrical outlet before installing a brush or pad driver.

ON

OFF

Fig. 4

To install a brush or pad driver, leave the handle in the upright position and tip the machine backwards so it rests on its wheels and upper handle section (Fig. 4). The brush and pad driver both attach in the same manner: align the cutouts on the inner ring of the brush or pad driver with the tabs on the inside of the ring of the drive hub (Fig. 5). Push the brush or pad driver firmly in position, then turn it counterclockwise until it locks into place.

To remove, turn the brush or pad driver clockwise until it stops, then lift it off. Note: Always remove the brush or pad driver when the machine is not in use.

ADJUSTMENTS

DRIVE BELT ADJUSTMENT

(Model 20” 1500 rpm 1.5 HP only)

CAUTION: Disconnect the power cord from the electrical outlet before adjusting drive belt tension.

1.Loosen the bolts holding the drive motor to the frame; do not remove (Fig. 6).

2.Turn the two screws at the rear of the frame until the belt is tight.

3.Test the machine. If belt slips, adjust further. Retest. If the belt does not slip, tighten the drive motor bolts. DO NOT overtighten the drive belt.

Adjusting Bolts

Fig. 6

CAUTION: Disconnect the power cord from the electrical outlet before installing a brush or pad driver.

Fig. 5

PAD CENTERING LOCK (Model 20” 1500 rpm 1.5 HP only)

To install a pad, tip the machine backwards so it rests on the rear wheels and handle. After centering the pad on the pad holder, insert the Pad Centering Lock and twist it clockwise until it securely locks in place. To remove twist the lock counterclockwise.

HANDLE ADJUSTMENT

The handle can be adjusted to any desired work position by simply pushing up on the handle lock (Fig. 7). Move the handle to the desired position, then firmly push down on the handle lock which will lock the handle in position.

Unlock

Lock

Fig. 7

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Index Commercial Floor Machine Series Owner’s GuideRead ALL Instructions Before Using this Vacuum Cleaner Service InformationGeneral Information USA 1-800-800-8975 Mexico CanadaGrounding Instructions OPERATION/ACCESSORIESChoosing the Right Brush and Drive Block Grounded Outlet BOXHOW to Remove Polisher from Shipping Crate Adjustments Brush and PAD Driver InstallationDrive Belt Adjustment Handle AdjustmentON/OFF Power Switch Triggers Handle CAM Lock AdjustmentControls Guidelines for OperationCord Storage Clean UP and StorageExcludes Vacuums Eureka Sanitaire Commerical Equipment Limited WarrantyFloor Machines / Air Movers

6000 specifications

The Sanitaire 6000 is a powerful and versatile vacuum cleaner designed for heavy-duty commercial cleaning applications. With its robust construction and advanced technologies, the Sanitaire 6000 stands out as an efficient solution for maintaining cleanliness in a variety of settings, including offices, schools, and health care facilities.

One of the primary features of the Sanitaire 6000 is its powerful motor. This high-performance motor generates significant suction, enabling the vacuum to pick up dirt, debris, and allergens from various surfaces, including carpets, hard floors, and upholstery. With a high-efficiency particulate air (HEPA) filter included, the Sanitaire 6000 effectively traps fine particles, making it an ideal choice for environments where air quality is a priority.

In addition to its strong suction capabilities, the Sanitaire 6000 incorporates a bagged filtration system, which helps to maintain optimal airflow and cleaning performance. The disposable bags are designed to hold a large amount of dirt, which means less frequent changes and ease of use for operators. This design not only enhances convenience but also contributes to a more hygienic cleaning process.

Another key characteristic of the Sanitaire 6000 is its lightweight and ergonomic design, making it easy for users to maneuver in tight spaces or around furniture. The vacuum features a comfortable handle and a telescoping wand that can be adjusted to suit different user heights, ensuring that everyone can operate the machine with ease.

Durability is another hallmark of the Sanitaire 6000. Constructed from high-quality materials, the vacuum is built to withstand the rigors of daily commercial use. This durability translates to lower maintenance costs and a longer lifespan, providing significant value to businesses looking to invest in reliable cleaning equipment.

The Sanitaire 6000 also boasts a range of accessories, including specialized attachments for different cleaning tasks. Whether it’s a crevice tool for reaching tight spots or a dusting brush for delicate surfaces, these attachments enhance the vacuum's versatility and improve overall cleaning efficiency.

In conclusion, the Sanitaire 6000 is a powerful and efficient commercial vacuum cleaner that offers advanced features and technologies. From its strong suction and HEPA filtration system to its ergonomic design and durable construction, the Sanitaire 6000 is engineered to meet the demands of rigorous cleaning environments, making it a top choice for professionals in the cleaning industry.
Top Page Image Contents