Shindaiwa X7502891100 manual Mixing Fuel, Fuel Requirements

Page 8

Assembly (continued)

1.Push one of the drum axles onto either of the two gearcase output shafts. If necessary, rotate the drum axle until the clevis pin hole in the axle aligns with the matching hole in the gearcase output shaft.

CAUTION!

The two drum assemblies are identical, but each drum must be installed with its recessed end facing toward the gearcase.

Mixing Fuel

2.Use a clevis pin and hitch pin to secure the drum axle to the shaft.

3.Slide the recessed end of a sweeper drum assembly over the installed axle, and then push the drum down the axle until the cotter pin hole in the axle extends above the drum surface.

4.Use a cotter pin to secure the drum assembly on the axle (see inset).

The cotter pin is designed to fit tightly against the outboard end of the drum, so you may need to com- press the drum face slightly during installation. spead the ends of the cotter pin to secure.

5.Repeat Steps 1-4 to install the remaining axle and drum assembly.

The PowerBroom tool should now be

completely assembled.

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improp- erly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PS344 PowerBroomTM Contents IntroductionSafety Safety LabelsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAssembly Prior to assemblyAdjustable Handle Emission Control Exhaust & EvaporativeAdjust Throttle Lever Free Play Sweeper Assembly sold separatelyMixing Fuel Fuel RequirementsFilling the fuel tank Handling FuelAfter use Minimize the Risk of FireStarting the Engine When the Engine Starts Stopping the EngineChecking Unit Condition If the engine does not startOptional accessories Debris shield OperatingBreak-in and Operation Operating TechniquesMaintenance Hour Maintenance Remove and replace the fuel filter element Hour maintenanceHour maintenance Valve Adjustment Hour maintenance Gearcase LubricationOverfill Replacing the gearcase oilCarburetor Adjustment Muffler MaintenanceEngine Break-In High Altitude OperationLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions 99922201031 02/05/2010 01/2010 Page Page Page Page Servicing Information Parts/Serial Number

X7502891100 specifications

The Shindaiwa X7502891100 is a powerful and versatile tool designed to meet the needs of landscape professionals and avid gardeners alike. This innovative equipment is known for its robust performance, exceptional build quality, and advanced features that enhance productivity and ease of use.

One of the standout characteristics of the Shindaiwa X7502891100 is its highly efficient engine. The unit is powered by a reliable two-stroke engine that delivers impressive torque and power to tackle even the toughest tasks in the garden or landscape. This engine technology is designed for optimal fuel efficiency, allowing operators to work longer with less frequent refueling. Furthermore, the engine complies with stringent emission regulations, making it an environmentally friendly choice for users who are conscious of their carbon footprint.

The design of the X7502891100 incorporates a lightweight frame, which promotes easy maneuverability and reduces operator fatigue during extended use. The ergonomic handle is another key feature that adds to user comfort and control. It is designed to minimize vibrations, ensuring a smoother operation that significantly enhances user experience.

Shindaiwa's proprietary technology is also evident in the X7502891100, which includes advanced air filtration systems. This technology ensures that the engine receives clean air, thereby extending the lifespan of the equipment and reducing maintenance costs. The tool is engineered for durability, with high-quality materials that can withstand the rigors of outdoor work.

Another impressive feature is the user-friendly starting system, which makes it easy for both experienced and novice operators to start the engine with minimal effort. This convenience is complemented by the tool's versatility, as it is compatible with a range of attachments that allow it to perform various tasks such as trimming, edging, and blowing.

In conclusion, the Shindaiwa X7502891100 stands out in the market for its combination of power, efficiency, and user-friendly features. Its advanced engine technology, ergonomic design, and durable construction make it an excellent investment for anyone looking to enhance their landscaping or gardening capabilities. Whether you are a professional landscaper or a dedicated hobbyist, the X7502891100 is engineered to deliver top-notch performance and reliability.
Top Page Image Contents