iHome IP57 Playing and Charging your iPhone or iPod, Using the Line-in Jack, Resetting the Unit

Page 7

Playing and Charging your iPhone or iPod

1.Place proper insert for your iPhone/iPod (see insert table on page 1) in Dock, then gently dock iPhone/iPod. When docked and connected to AC power, the iPhone/iPod will charge until fully charged. The unit will not charge iPhone or iPod when operating on internal battery. The iPhone/iPod will not overcharge.

2.Press the Button to play iPhone/iPod and the button will light up to show unit is on.

3.Press the + or – Button to adjust unit volume.

4.To switch off the unit, press the Button once more. It will switch off both the unit and your iPhone/iPod.

NOTE: Docking an already playing iPhone or iPod will also turn on your unit after a moment. Similarly, undocking a playing iPhone or iPod will turn the unit off.

Using the Line-in Jack

1.Plug one end of an audio patch cord (available at www.ihomeaudio.com) into the headphone or line-out jack on your audio device and the other end of the patch cord into the Line-in Jack on the left of this unit.

2.Turn on your audio device and put it in play mode.

2. Press the Button to turn the unit on and begin playback on your external audio device. The button will light up to show unit is on.

3.Press the + or – Button to adjust the volume. You may need to adjust your device’s volume too.

4.To switch off the unit, just press the Button again. Remember to switch off your device too.

NOTE: Do not connect and play an audio device to the line-in jack while playing an iPhone or iPod in the dock or you will hear both sound sources at once.

Resetting the Unit

This unit was designed with a special surge protection circuit to prevent permanent damage to the unit in the event of an unexpected power surge. If your unit appears to be ‘locked up’ and is not operating normally, and you know that the battery is properly charged, use a straightened paper clip, toothpick, or similar object to press the RESET button, located on the top of the battery compartment cover near the battery indicator. This will unlock the unit and restore the original factory default settings.

4

Image 7
Contents Model iP57 Maintenance Table ofContentsFCC Information IP57 Quick Start Front Panel Controls and IndicatorsSide Panel Connect AC Adaptor Charging the Internal BatteryEnd-Of-Life Battery Disposal Instructions Getting StartedResetting the Unit Using the Line-in JackPlaying and Charging your iPhone or iPod Consumer Guide to Product Safety Solution Trouble ShootingOr call 1-800-288-2792 Toll Free Consumer Repair DepartmentPage IP57-071211-A

IP57 specifications

The iHome IP57 is an innovative portable Bluetooth speaker that combines sleek design with remarkable sound quality, making it ideal for music lovers on the go. One of its standout features is its water resistance, certified with an IP57 rating. This means it can withstand splashes and even be submerged in water for short periods, making it a perfect companion for pool parties, beach outings, or camping trips.

The iHome IP57 is equipped with Bluetooth technology, allowing users to wirelessly connect their smartphones, tablets, or other Bluetooth-enabled devices. With a range of approximately 30 feet, the speaker provides flexibility and freedom of movement while streaming music. Additionally, it supports a variety of audio formats, ensuring compatibility with most digital music libraries.

This speaker is designed for portability; it is lightweight and compact, fitting comfortably in bags or even larger pockets. The durable construction not only makes it portable but also rugged enough to endure bumps and drops, appealing to those with an active lifestyle. The built-in rechargeable battery offers impressive playtime, allowing users to enjoy hours of continuous music without frequent interruptions for charging.

Sound quality is at the forefront of the iHome IP57's design. Equipped with dual drivers, the speaker produces rich, clear audio with a balanced bass response. The soundstage is well-defined, making it suitable for various music genres, from acoustic tracks to heavy bass beats. The speaker also includes a passive radiator, enhancing the low-end frequencies for a fuller audio experience.

In addition to its impressive audio capabilities, the iHome IP57 features integrated speakerphone functionality. This allows users to take calls hands-free, thanks to its built-in microphone, which captures voice clearly while minimizing background noise. Another convenient feature is the inclusion of an auxiliary input, allowing users to connect non-Bluetooth devices easily.

Overall, the iHome IP57 stands out for its blend of durability, portability, and excellent sound performance. With its appealing features and thoughtful design, it provides an outstanding solution for anyone looking to enjoy music in various environments without compromising on quality.