Stow CP-20H Pump Components

STOW CP-20H — PUMP COMPONENTS

Figure 2 shows a typical application using the STOW Model CP-20H centrifugal pump. Please note that this pump is intended for the removal of clean water. This type of pump should only be used for clear water (no large debris) applications as it has a limited solid handling capability of only 10% by volume. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris.

Figure 2. STOW CP-20H Pump Application

1.	Pump – The STOW Model CP-20H is 2-inch centrifugal
	pump used in general purpose de-watering applications.
	Pump should only be used for clear water applications
	such as agricultural, industrial and residential.
2.	Fill Cap – Prior to operation, the pump casing should be
	filled with water.Remove this cap to add water to the pump.
	After the initial prime, a sufficient amount of water will be
	retained in the casing so that the operator will not need to
	re-prime later.
	If the casing is dry or has insufficient water, the pump will
	have difficulty in priming which could lead to premature
	mechanical seal wear thus causing damage to the pump.
3.	Discharge Port – Connect a 2-inch discharge hose to this
	port.
4.	Worm Clamp – Used to secure the hose to the inlet and
	outlet ports on the pump. Use two clamps to secure the
	hose on the inlet side of the pump.
5.	Discharge Hose – Connect this flexible rubber hose to
	the discharge port on the pump. Make sure that the hose

lays flat and is not kinked. Use only recommended type discharge hose. Contact Multiquip parts department for ordering information.

6. Suction Port – Connect a 2-inch inlet hose to this port. Use two worm clamps to secure the hose.

7. Suction Hose – Connect this flexible rubber hose to the suction port on the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type suction hose. Contact Multiquip parts department for ordering information

8. Clean-out Cover Handles – To gain access to the pump's clean-out area, grip both handles, then pull to remove cover. Make sure both locking knobs have been released before attempting to remove clean-out cover.

9. Drain Plug – Remove this plug to drain water from the pump.

10. Clean-out Cover – Remove cover to gain access to the clean-out area.

11. Locking Knobs– Turn both knobs clockwise to secure clean-out cover, turn counter-clockwise to release cover.

12. Strainer – Always attach a strainer to bottom side of the suction hose to prevent large objects and debris from entering the pump. Strainer should be positioned so that it will remain completely under water.Running the pump with the strainer above water for long periods can damage pump.

STOW CP-20H CENTRIFUGALPUMP — PARTS MANUAL— REV. #0 (05/30/03) — PAGE 13

CP-20H specifications

The Stow CP-20H is a versatile and robust compact tractor designed for a variety of agricultural tasks, combining efficiency, ease of use, and advanced technology. This model is particularly favored by small to mid-sized farm operations, landscaping companies, and hobby farmers due to its compact size and powerful performance.

One of the standout features of the Stow CP-20H is its reliable 20 horsepower engine, which provides ample power for a range of implements and attachments. The engine is designed for fuel efficiency, helping users to minimize operational costs while maximizing productivity. The unit is equipped with a hydrostatic transmission, which allows for seamless speed adjustments without the need for manual gear shifting. This feature provides enhanced maneuverability, making it easier to navigate tight spaces and perform delicate tasks.

The Stow CP-20H also excels in terms of comfort and usability. The operator’s platform is spacious and ergonomically designed, featuring a high-backed seat that reduces fatigue during extended periods of use. Additionally, the controls are intuitively laid out, allowing for easy access and operation. The tractor's compact design ensures a tight turning radius, which is beneficial when working in confined areas.

One of the technological highlights of the CP-20H is its hydraulic system, which maximizes lifting capability and implement performance. With a strong lift capacity, the tractor can handle a variety of attachments such as loaders, backhoes, and mowers, making it an excellent multi-tasker. The three-point hitch system is also noteworthy, as it allows for quick attachment and detachment of implements.

In terms of safety and durability, the Stow CP-20H is built with a sturdy frame and well-designed protective features. It is equipped with ROPS (Roll Over Protection Structure) to enhance operator safety in uneven terrain. The tractor's construction is designed to withstand the rigors of daily use, ensuring longevity.

Overall, the Stow CP-20H stands out as a reliable compact tractor that combines power, versatility, and user-friendly features. Its advanced technology and robust design make it an ideal choice for those seeking an efficient solution for various agricultural and landscaping tasks. Whether it’s mowing fields, plowing gardens, or transporting materials, the Stow CP-20H is equipped to handle the demands of diverse farming projects effortlessly.