Skuttle Indoor Air Quality Products instruction

Automatic Humidifier Control

SEH-7100-000

by Skuttle® Indoor Air Quality Products

Safety and Installation Instructions*

INSTALLER: READ COMPLETE INSTALLATION INSTRUCTIONS BEFORE BEGINNING INSTALLATION. (Throughout this document, the terms “Compustat” and “humidifier control”

are used interchangeably.)

WARNING: This product is for residential applications only, and must be installed by a qualified HVAC contractor. Failure to comply could invalidate the product warranty, or result in serious injury or electrocution.

DANGER:

•Disconnect electrical power to the furnace before beginning installation. Contact with a live electrical wire can cause serious injury or electrocution.

•Use caution when cutting plenum openings and handling ductwork. Sharp edges can cause serious cuts and bleeding.

CAUTION:

•Do not mount Compustat on the supply duct or plenum. The unit will not withstand supply temperatures.

•Do not mount Compustat downstream of the bypass outlet. Inaccurate humidity readings will cause the humidifier to operate incorrectly.

•When installing Compustat on downflow furnaces, make sure the blower continues to run after a heat call is satisfied, to prevent high temperatures from damaging the control.

•Do not set the humidity so high that condensation forms on windows or walls. Indoor condensation may result in damage to the home.

*These instructions are for installation of the Skuttle Compustat humidifier control only. For installation of a Skuttle humidifier, refer to the instructions packaged with the humidifier.

STEP 1: Check Contents of Compustat Carton

Make sure the following components are present (see Figure 1):

•	Humidifier Control	•	Manual Mode Faceplate
•	Outdoor Temperature Sensor	•	Mounting Template

•Sensor Shield

STEP 2: Disassemble the Humidifier Control

Pull the knob off, then remove the cover by inserting a screwdriver in the slot on the right side of the control.

Figure 1

Figure 2

STEP 3: Select an Interior Location and Mount the Control

Select a location to mount the humidifier control that is at least 6 inches upstream from any of the following (see Figure 2):

•Humidifier

•Humidifier Bypass Ductwork (if applicable)

•Fresh Air Intake Ductwork (if applicable)

Once a location has been selected, carefully position the humidifier control template, then drill and cut the opening. Use four sheet metal screws and the gasket (provided) to mount the control over the duct opening. Make sure the control is sealed tightly to the duct.

SEH-7100-000 specifications

Skuttle Indoor Air Quality Products SEH-7100-000 is a cutting-edge solution designed to enhance indoor air quality in residential and commercial spaces. This state-of-the-art device focuses on providing cleaner, healthier air through advanced filtration and humidity control technologies. It is particularly beneficial for those suffering from allergies, asthma, or other respiratory conditions.

One of the standout features of the SEH-7100-000 is its high-efficiency filtration system. This unit is equipped with a MERV 13 filter, which is capable of capturing a wide range of airborne particles, including dust, pollen, pet dander, and mold spores. The MERV 13 rating indicates that the filter can effectively trap particles as small as 0.3 microns, significantly reducing indoor pollutants and improving overall air quality.

Another key characteristic of the SEH-7100-000 is its humidity control feature. Maintaining optimal humidity levels is crucial for comfort and health, as excessive humidity can promote mold growth and dust mites, while overly dry air can lead to respiratory issues and skin irritations. The Skuttle unit monitors and adjusts humidity levels automatically, ensuring a balanced environment for occupants.

The SEH-7100-000 also integrates advanced technology to improve user experience and ease of maintenance. The unit is designed with a user-friendly interface that allows for effortless operation and monitoring. Additionally, it comes with a filter replacement indicator that alerts users when it’s time to change the filter, helping to maintain peak performance without the hassle of manual checks.

Another noteworthy feature is its quiet operation. Designed with sound-dampening technology, the SEH-7100-000 operates with minimal noise, making it ideal for bedrooms, offices, and other quiet spaces.

Skuttle’s commitment to energy efficiency is evident in the SEH-7100-000, as it operates effectively while using minimal electricity. This not only reduces environmental impact but also keeps utility costs low for users.

In conclusion, the Skuttle Indoor Air Quality Products SEH-7100-000 is an innovative solution for improving indoor air quality. With its high-efficiency filtration, humidity control, user-friendly design, quiet operation, and energy efficiency, it stands out as an ideal choice for anyone looking to create a healthier indoor environment.