Installing the Evaporator

Note: The evaporator is designed to be mounted on two standard 16” spaced wall studs.

1.Locate two desired wall studs. Mark center lines for the studs vertically on the wall (16 inches apart) followed by a level horizontal line at your desired height.

Note: The top of the unit needs to be installed at a minimum of 6 inches from the ceiling and no further than 18 inches from the ceiling.

2.Place the installation template on the wall lining up the vertical lines through the sight slots.

3.Mark through the indicated Mounting Screw holes and location for the Access Hole.

4.Set Installation Template aside.

5.Install the supplied four 2” #8 Hex Head Screws into the marked mounting screw locations leaving 1/6” be- tween the wall surface and screw head.

6.Cut out the Access Hole using a drywall saw or desired method. Be sure to clear all debris and insulation.

7.The wall is now ready for installation. Place the prepared unit below the install location.

	Note: During installation WhisperKOOL recommends	9
	elevating the unit close to the install height.
	8. Raise the evaporator to the installation location. Align the rear key
	holes with the mounting screws and mount the unit.
	9. Using a 1/4” wrench or socket tighten accessible mounting
	screws inside of the unit.
	10. Route the 3/8” suction line and 1/4” liquid line into 10
	the unit and braze.	Power
	Note: Angle the flame up and away from any electrical	3/8” Suction
	and insulation while brazing inside of the unit.	3/8” Suction
	and insulation while brazing inside of the unit.	1/4” Liquid
		1/4” Liquid
	11. Insulate the 3/8” suction line with the 10” piece of	Drain
	supplied cork tape.	Drain
	supplied cork tape.

12.Route power supply wires into the unit through the power knockout and install the supplied strain relief.

13.Connect power supply wires to the pre-installed butt splice connectors located inside of the unit (Hot=Black, Neutral=White, Ground= Green).

14.Route drain line out of the unit to desired location.

15.Connect the Bottle Probe.

16.Reinstall the access panel removed in step 1 of Evaporator Preparation.

17.Plug in the evaporator and condensing unit.

18.Follow standard refrigeration system charging processes. WhisperKOOL recommends pressurizing the sys- tem using dry nitrogen, then allow unit to hold pressure for 30 minutes prior to charging.

19.Once the system is charged, adjust the Thermal Expansion Valve to maintain 8-12°F superheat if necessary.

Please refer to the Split System Owners Manual for condensing unit wiring diagrams and general split system information.

PMS-01 042610

Page 2

2PMS-01, 042610 specifications

WhisperKool 042610,2PMS-01 is a premium wine cooling unit designed to provide the ideal environment for wine storage. Precision-engineered for optimum temperature control, this model caters to wine connoisseurs and collectors who understand the importance of proper wine preservation.

One of the main features of the WhisperKool 042610,2PMS-01 is its dual zone capability, allowing users to store wines at different temperatures simultaneously. This is particularly beneficial for collectors with a diverse selection of wines that require different storage conditions. The ability to maintain a consistent temperature is crucial, as fluctuations can negatively affect the aging process and flavor profile of fine wines.

This unit employs advanced cooling technology, including a powerful compressor that operates quietly yet efficiently. The WhisperKool system utilizes a state-of-the-art digital thermostat, which allows precise temperature control. Users can easily set and monitor their preferred temperatures through an intuitive interface, ensuring that the wines are kept in their optimal conditions.

Another hallmark of the WhisperKool 042610,2PMS-01 is its elegant design. It features a sleek, modern profile that seamlessly fits into various home or commercial environments. The unit is well-constructed with durable materials to ensure longevity. The built-in UV-filtered double-paned glass door provides protection against harmful light while showcasing the wine collection, allowing users to display their bottles without compromising quality.

Additionally, this cooling unit incorporates both passive and active ventilation systems to ensure efficient airflow and noise reduction. The energy-efficient design not only minimizes energy consumption but also significantly reduces operational noise, making it a perfect fit for homes, restaurants, or wine cellars.

Temperature stability and humidity control are paramount in wine storage, and the WhisperKool 042610,2PMS-01 excels in these areas. It maintains ideal humidity levels to prevent corks from drying out and allows for proper aging of wines. With features like auto-defrost and an easy-to-clean air filter, maintenance becomes hassle-free.

In summary, the WhisperKool 042610,2PMS-01 is a cutting-edge wine cooling system tailored to meet the needs of serious wine enthusiasts. Its dual-zone functionality, advanced technology, sleek design, and superior temperature stability make it an exceptional choice for optimal wine preservation.