Maintenance

BRUSH CLEANING AND MAINTENANCE

After each session of carpet cleaning, the brushes and the brush housing should be cleaned. Before cleaning or changing the brushes, always unplug the machine from the power supply.

Brushes are removed without tools. After handle is in locked position, tilt the machine back and rest on handle. To release brush from spring clip pull spring clip away from brush end cap. Lift brush out of machine.

The brushes may be soaked in warm or hot water using mild detergent, and then rinsed with warm water. NOTE: Brushes with crushed bristles can often be restored to original condition by soaking in hot water.

Keep brushes clean and free from debris. Rotate brushes after every use as this will increase the life span of the brushes and ensure even wear.

Before reinstalling brushes, clean out machine brush housing and hopper by wiping with a clean damp cloth.

MACHINE MAINTENANCE

The Maintainer requires very little maintenance. Wipe down the machine periodically with a clean cloth. DO NOT spray water directly over the top of machine.

Deformation of the brush bristles can result in unbalanced running and excessive vibrating or jumping.

The machine is fitted with a circuit breaker. In the unlikely event of overloading, the circuit breaker will automatically trip. It can be reset after approximately 30 seconds (or when the machine cools down) by pushing the set button located on the cover housing.

DAILY MAINTENANCE

1.Clean and inspect brushes.

2.Clean and inspect brush housing, debris tray and machine. Rinse debris tray if needed.

3.Inspect power cord for wear or damage. This cable will lie on wet carpet. To prevent electrical shock replace cords that are frayed or have cracked insulation immediately.

4.Flush the tank, pump and spray jet with hot water (Deluxe only).

5.Clean Strainer.

PERIODIC MAINTENANCE

1.Check all handles, switches, electrical cables and connections on your machine for damage. Repair or replace immediately.

2.Inspect and/or replace brushes. Replace brushes when main bristles are worn to the same level as the yellow indicator bristles.

3.Check spray pattern. Clean or replace jet if the pattern is blocked or uneven

ANNUAL MAINTENANCE

1.Check all bearings for noise and wear.

2.Check motor for operation.

3.Check overall machine for operation.

4.Check belts for wear and change belts every second year.

4-1	86269870 07/11/07

IMXIE17 10066410, IMIE17 10066550, IMX 10066400, IM 10066360 specifications

Windsor, a reputable name in the realm of advanced technology solutions, has unveiled its innovative products: the Windsor IMX 10066400, IM 10066360, IMXIE17 10066410, and IMIE17 10066550. These models reflect the brand's commitment to delivering quality, efficiency, and state-of-the-art features tailored to various user needs.

The Windsor IMX 10066400 is designed for high-performance applications, showcasing exceptional durability and efficiency. One of its primary features is the advanced filtration system, which enhances air quality while minimizing energy consumption. The intuitive control panel allows users to easily adjust settings, ensuring optimal performance in different environments. Built with robust materials, the IMX 10066400 is ideal for commercial settings, where reliability and constant operation are crucial.

On the other hand, the Windsor IM 10066360 focuses on versatility. This model caters to a diverse range of cleaning requirements, making it suitable for both large facilities and smaller spaces. Its lightweight design ensures easy maneuverability, while the powerful suction technology guarantees effective dirt and debris removal. Additionally, the IM 10066360 incorporates user-friendly features such as easy maintenance and replaceable parts, extending the lifecycle of the machine.

The Windsor IMXIE17 10066410 stands out with its integrated smart technology. This model brings automation into cleaning practices, allowing users to monitor and schedule tasks through a convenient mobile app. This feature not only enhances convenience but also optimizes cleaning operations by ensuring that processes are carried out at the most efficient times. The powerful motor combined with intelligent sensors ensures thorough cleaning without unnecessary energy consumption.

Lastly, the Windsor IMIE17 10066550 combines cutting-edge technology with ergonomic design. This model is tailored for ease of use, featuring a comfortable handle and lightweight construction. The advanced noise reduction system makes it suitable for use in noise-sensitive environments like offices and healthcare facilities. Versatile attachments further enhance the cleaning capabilities, allowing users to tackle various surfaces with minimal hassle.

In summary, each of these Windsor models brings unique features, advanced technologies, and characteristics designed to meet the diverse demands of modern cleaning. From high efficiency and versatility to smart automation and ergonomic design, Windsor continues to set benchmarks in the industry, making cleaning easier and more effective for all users.