Windsor Model D, Model V, Model B, Model C Typical Industravac Assembly, Location

Typical Industravac Assembly

Filter Bag Buckle

External

Bag Shaker

Access Door

Inverted

Filter Bags

Adjustable

Door Latches

Vacuum

Tube Inlet

Target Plate

Patent No. 4,874,410

Optional

Equilizing Line

Dirt Can

Locking Bail

Dirt Can

Lift Cam Cam Arm

Lever Clamp

Location

Industravac vacuum producers are designed for operation at or near sea level atmospheric pressure and a nominal ambient temperature of 70°F (21°C).When necessary, they can be factory- designed for higher altitude or higher temperature operation.

Consideration should be given to the noise generated by Industravac equipment and its contribution to the ambient noise level. When desired, the exhaust can be fitted with an

Bag Head Spring

	Multi-Stage Centrifugal
Two-Stage	Vacuum Producer
	(Series A, B & D)
Separator
	Exhaust
	Outlet
Impellers	Spencer
and Deflectors	Reverse-Curve Casing
	Registered Trademark No. 1,616,417
	Continuous
	Duty Motor

Connector Sleeve

and Clamps

Vacuum Inlet Valve for

1-1/2" I.D. Hose (Standard)

Steel Frame

optional Spencer silencer. C Series models have a built-in silencer as standard equipment.

Note: V Series stationary models should be properly protected from precipitation.

Portable Model. The portable Industravac unit is designed for use on flat, dry, level surfaces. As a safety precaution, the wheels should be blocked to prevent accidental movement.

3