Machine Operations, SET UP and Operation

INCOMPATIBLE CHEMICALS Aldehydes

Aromatic Hydrocarbons Butyls

Carbon Tetrachloride Clorox* Chlorinated Bleaches Chlorinated Hydrocarbons D-Limonene

Lysol* Methyls (MEK) Perchlorethylene (perc) Phenols Trichlorethylene

MACHINE OPERATIONS

SET UP AND OPERATION

1.Upon removing your new mini-extractor from the box, loosen the latch at back end of the machine that secures the recovery tank to the solution tank. Remove the recovery tank from the solution tank.

2.Pour clean, hot water to the indicated fill line of the solution tank. To avoid possible tank distortion, water temperature must not exceed 140 F (60C).

3.Add a non-foaming cleaning solution concentrate, for use in hot water extractors at the proportions noted on the container (See list below), into solution tank.

4.Place the recovery tank back onto the solution tank and refasten the latch.

5.Plug the power cord into grounded outlet (See

GROUNDING INSTRUCTIONS).

6.Connect the vacuum and cleaning tool hoses to the extractor. This unit is equipped with an 1/8” male quick connect for solution hose attachment and a 1” ID vacuum hose hookup. Insure that the female solution hose coupler is securely locked onto the male coupler on the extractor.

7.Turn switch ON. This switch operates both the vacuum motor and the water pump. NOTE: The pump is an oscillating pump and should not be run dry for extended periods of time. This may cause damage to your pump, therefor voiding your warranty.

8.Squeeze the solution lever on the cleaning tool to spray cleaning solution and place the vacuum head on the surface to be cleaned. Normally, chemical is applied on the push stroke while vacuuming is done on the pull stroke. For heavily soiled carpets the hand tool may be used in the scrubbing manner, applying

chemical in both the push and pull stroke.

ALWAYS FINISH UP AN AREA WITH A VACUUM PULL STROKE.

9.The shutoff float inside the recovery tank will impede the vacuum flow when the tank is full. When this occurs, empty the recovery tank.

NOTE: Dispose of waste in a proper manner which would not violate any Local, State or Federal law.

Operating Vacuum after shutoff has activated could draw water directly into the vac motor. This will cause damage to the motor, therefor voiding your warranty.

ALWAYS TEST UPHOLSTERY/CARPET FOR COLOR

FASTNESS IN AN INCONSPICUOUS PLACE. Also, to avoid prolonged drying times, do not spray too much solution in any one area.

Always use defoamer if foaming occurs. Foam will suspend large particles which may damage vacuum as well as allow liquid into the vacuum motor without activating the float shutoff.

To prevent possible disease hazard, before attempting to clean bodily fluids spills, you must kill any viruses, germs or bacteria present in the bodily fluid.

SUITABLE

CHEMICALS Alkalis

Clorox II Bleach*

Defoaming Agents

Detergents

Hydroxides

Oxygen Bleaches

Soaps

Sta-Puf Fabric

Softener*

Vinegar

*Registered Trademark

Before making any adjustments or performing any maintenance to your machine, disconnect the power cord from the electrical source.

SHUT DOWN AND STORAGE

1.Turn Switch OFF. Empty recovery tank completely and rinse several times to remove any dirt or debris that may be left behind.

2.Tip the solution tank over a sink to drain any unused cleaning solution and rinse with clean water to remove any suds left behind by the cleaning chemicals. NOTE: Dispose of waste in a proper manner which would not violate any Local, State or Federal law

3.Run a small amount of clean water through pump if chemicals were used. This will help insure the life of your pump.

4.Check the spray jet on the cleaning tool for full spray pattern and inspect vac head for any obstructions. Also make sure to clean the filter cap attached to portal cover of any debris that may have been trapped during cleaning.

5.Remove as much moisture from system before storing in cold climates. Excess water may freeze during storage and crack internal components, causing damage to the unit.

PRSIF2/PRSDIF2 98902 12/28/01

3-1

PRS2, PRSD2 specifications

Windsor PRSD2 and PRS2 are two cutting-edge public relations and communications platforms that have been making waves in the industry due to their innovative features, advanced technologies, and emphasis on user-friendly interfaces. As organizations increasingly recognize the importance of effective public relations in achieving their strategic objectives, these platforms have emerged as vital tools for managing relationships with stakeholders and enhancing brand visibility.

One of the main features of Windsor PRSD2 is its robust media monitoring capabilities. This tool allows users to track media coverage across various platforms, including traditional news outlets, blogs, and social media. By providing real-time alerts and comprehensive analytics, PRSD2 enables organizations to stay informed about their public image and respond promptly to emerging trends or negative coverage.

In addition to media monitoring, Windsor PRS2 focuses on content creation and distribution. With an integrated content calendar, users can plan and schedule press releases, blog posts, and social media updates. The platform’s collaboration tools are invaluable for teams working remotely or across different locations, allowing multiple stakeholders to contribute to content creation seamlessly. Furthermore, PRS2 includes templates and design tools that streamline the process of crafting visually appealing communications.

Both platforms leverage advanced analytics and artificial intelligence to enhance decision-making. By analyzing audience engagement metrics and sentiment analysis, Windsor PRSD2 and PRS2 provide actionable insights that help organizations refine their strategies. These insights enable teams to understand their audience better and tailor their messaging to resonate effectively with target demographics.

Another significant characteristic of Windsor PRSD2 and PRS2 is their emphasis on integration. These platforms can easily connect with various third-party applications, including customer relationship management (CRM) systems, email marketing tools, and analytics software. This ensures that organizations can maintain a cohesive communication strategy across all touchpoints, creating a unified brand presence.

The user interface of both platforms is designed with simplicity in mind, ensuring that even users with minimal technical expertise can navigate the software effectively. This focus on user experience means that organizations can adopt these tools swiftly, minimizing the learning curve.

Ultimately, Windsor PRSD2 and PRS2 stand out in the public relations sector for their combination of advanced features, innovative technologies, and user-friendly design. By equipping organizations with powerful tools for media monitoring, content distribution, and audience analytics, these platforms empower companies to enhance their public relations efforts and achieve greater success in connecting with their audiences.