Woods Equipment D6121T, D5221T manual Transportation, Maintenance, Storage

Page 5

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

„Before performing any service or maintenance, lower attachment to ground, turn off power unit engine, remove key, and disconnect battery ground cable (negative -).

TRANSPORTATION

„Use extra care when loading or unloading the machine onto a trailer or truck.

„Never allow riders on power unit or attachment.

„Do not operate or transport on steep slopes.

„Do not operate or transport equipment while under the influence of alcohol or drugs.

MAINTENANCE

„Before attempting to unplug vacuum hoses, dis- engage PTO, stop power unit, and remove key.

„Before performing any service or maintenance, lower attachment to ground, turn off power unit engine, remove key, and disconnect battery ground cable (negative -).

„Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

„Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head.

„Make sure attachment is properly secured, adjusted, and in good operating condition.

„Keep all persons away from operator control area while performing adjustments, service, or maintenance.

„Tighten all bolts, nuts and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

„Make sure shields and guards are properly installed and in good condition. Replace if dam- aged.

STORAGE

„Keep children and bystanders away from stor- age area.

™

Mow’n Machine Vacuum (9/11/00)

Safety 3

Image 5
Contents MOW’N Machine Vacuum To the Dealer Ii IntroductionGeneral Information Table of ContentsIntroduction Safety Rules SafetyTraining PreparationTransportation MaintenanceStorage „ Keep children and bystanders away from stor- age areaBe Careful Safety & Instructional DecalsLocated on back side of blower housing Vacuum Installation InstallationRemove Hardware Install Bearing Mount AssemblyInstall Bearing Mount Remove Vacuum Drive Belt Install Vacuum Drive BeltInstall Belt Shield Dealer Check Lists Dealer Check ListPRE-DELIVERY Check List DEALER’S Responsibility Delivery Check DEALER’S ResponsibilityService ServiceReplace Vacuum Housing Bearings Install New BearingsReplace Vacuum Spindle Bearings Attach vacuum housing to deck and secureService Parts Vacuum & Drive AssemblyRef Part No Description Vacuum & Drive Assembly Parts ListSAE Series Torque Chart Bolt Torque ChartTypical Washer Installations AppendixAbbreviations Bolt Size ChartLimited Warranty Mow’n Machines Woods Equipment Company MAN0116