WindChaser Products PACRWC-HP Setting the Unit to Turn on and Shut OFF AT a Desired Time, Time on

Front View

1.Control Panel with LED Display

2.Adjustable Dial: Thermostat and Timer

3.Adjustable Vertical/Horizontal Louvers

4.LED Display

5.Handle

6.Remote Control

Rear View

7.Air Outlet Hose

8.Evaporator Air Intake

9.Air Intake Hose

10.Hose Connectors

11.Water Drain and Plug

12.Power Cord

13. LCDI Plug 7

10

11

1

2

3

5

4

6

8

9

13 or

12

10.TIME ON

To program the timer, press Timer On button until the

Main LED display shows a flashing ‘ ’.

11.TIME OFF

Press Timer Off button and the Main LED display will

show a flashing ‘	’.
12. HR

Press to set the desired hour setting.

13.MIN.

Press to set the desired minute setting.

NOTE: ALL SETTINGS CAN BE VIEWED ON THE REMOTE DISPLAY

SETTING THE UNIT TO TURN ON AND SHUT OFF AT A DESIRED TIME.

Press the TIME ON button once, to set the start time of the unit. Press the TIME ON button again to cancel this setting.

Press the TIME OFF button once, to set the end time of the unit. Press the TIME OFF button again to cancel this setting.

To set specific TIME ON

1.Press the TIME ON button once

2.Select the desired hour and minutes you want the unit to turn on again.

-To set the hours, press the HR button once, advancing the timer 1 hour, continue to press this button, the clock will add by 1 hour until extended to 11 hours, then will change to PM or AM and return to 0 (12:00). When the timer advances to 11, the next press will return the timer to either 12:00 am or pm.

-To set the minutes, press MIN button once, the clock will add by 10 minutes, continue to press this button. The clock will add by 10 minutes until extended to 50 minutes and return to 0.

3. Once time is set do not press the TIME ON button.

To set specific TIME OFF

1.Press the TIME OFF button once

2.Select the desired hour and minutes you want the unit to turn off again.

-To set the hours, press the HR button once, advancing the timer 1 hour, continue to press this button, the clock will add by 1 hour until extended to 11 hours, then will change to PM or AM and return to 0 (12:00). When the timer advances to 11, the next press will return the timer to either 12:00 am or pm.

-To set the minutes, press MIN button once, the clock will add by 10 minutes, continue to press this button. The clock will add by 10 minutes until extended to 50 minutes and return to 0.

3.Once time is set do not press the TIME OFF button.

Remote control real time clock instructions

-Open the battery cover of the remote control and press the Clock Set button with a pencil or pen.

-Press the HR. button and MIN button and adjust the cor- rect time.

-Press the Clock Set button again and close the battery cover.

-The display will show the correct time

Clock Time settings: HR and MIN

To set the hours, press HR button once, the time will add 1 hour, continue to press this button, the clock will add by 1 hour until extended to 11 hours, then will change to PM or AM and return to 0 (12:00).

To set the minutes, press MIN button once, the clock will add 1 minute, continue to press this button and the clock will add by 1 minute until extended to 59 minutes, then return to 00.

Clock set button Reset button

Back of remote

TO RESET ALL FUNCTIONS ON THE REMOTE CONTROL PRESS THE RESET BUTTON WITH A PENCIL OR PEN.

4 9