Windsor CDT7IB/10080060, CDT7IE/10080070 manual Troubleshooting Chart, Problem Cause Solution

Page 21

TROUBLESHOOTING CHART

PROBLEM

CAUSE

SOLUTION

No Power, Nothing Runs

1.

Is the cord plugged in.

2.

Circuit breaker tripped in building.

 

 

3.

Faulty switch.

 

4.

Faulty power cord or pigtail.

Vacuum Motor Will Not

1. Vacuum circuit breaker tripped.

Run

2. Faulty main vacuum switch.

 

3.

Loose wiring.

 

4.

Faulty vac motor.

Vacuum Motor Runs But

1. Debris lodged in vac shoe.

Suction Is Poor

2. Dome gasket defective or missing.

 

3.

Vacuum hose cracked or hose cuff loose.

 

4.

Recovery tank full / float ball stuck in the up

 

 

position.

Poor Or No Water Flow

1. Main pump switch off.

(Carpet Is Streaky)

2. Jets clogged or missing.

 

3.

Solution filter clogged.

 

4.

Faulty solenoid.

Brush Does Not Spin

1.

Brush switch off.

2.

Brush circuit breaker tripped

 

 

3.

Brush belt broken.

 

4.

Faulty brush motor.

1.Plug in cord.

2.Reset breaker

3.Call for service.

4.Call for service.

1.Reset breaker

2.Call for service.

3.Call for service.

4.Call for service.

1.Remove debris from vac shoe.

2.Replace as necessary.

3.Replace or repair as necessary.

4.Turn off vac motor. Drain and rinse recovery tank.

1.Turn on.

2.Clean using a vinegar /water solution or replace.

3.Drain solution tank and clean solution filter.

4.Call for service.

1.Turn on brush switch.

2.Reset circuit breaker.

3.Replace as necessary.

4.Call for service.

CADET 86038340 04/19/07

4-4ENG

Image 21
Contents Modelcountry Carpet ExtractorCDT7IA/10080050 Australia CDT7IB/10080060 Britian CDT7IS/10080080 SwitzerlandYour Dealer Machine Data LOG/OVERVIEWTable of Contents HOW to USE this Manual Read ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Label Location Accessory Tool Usage Technical Specifications Power TypeGeneral DIMENSIONS/WEIGHT Electrical Cord CONTROLS/COMPONENT Locations3ENG 4ENG Filling the Cadet Filling OperationsOperations CorrectIncorrect 7ENG 1in 25mm Cleaning Procedure9ENG Maintenance Periodic MaintenanceDaily / Regular Maintenance Remove the vacuum motor Vacuum Motor ReplacementSolution Pump Replacement Belt ReplacementProblem Cause Solution Troubleshooting ChartWiring Diagram 6ENG
Related manuals
Manual 41 pages 39.24 Kb

CDT7IB/10080060, CDT7IE/10080070, CDT7IA/10080050, CDT7IS/10080080 specifications

Windsor has established itself as a leader in the field of commercial cleaning equipment, with a particular focus on floor care. Among its notable offerings are the Windsor CDT7IE, CDT7IS, CDT7IA, and CDT7IB models. Each of these machines is designed to meet the varying needs of different cleaning environments, providing both versatility and efficiency.

The CDT7IE model stands out with its exceptional ergonomic design, which enhances user comfort during prolonged cleaning tasks. It features advanced filtration technology that captures dust and allergens, making it ideal for healthcare environments and facilities requiring stringent cleanliness standards. Its powerful suction capabilities ensure optimal dirt and debris removal, while adjustable height settings allow for seamless transitions between different floor surfaces.

On the other hand, the CDT7IS is engineered with enhanced durability in mind, making it perfectly suited for high-traffic areas. This model is built with reinforced components that withstand the rigors of daily use, ensuring longevity and reliability. Additionally, it comes with an easy-to-use control panel, which simplifies operation for users of all skill levels. The CDT7IS also boasts a large-capacity dust bag, reducing the frequency of changes and allowing for longer cleaning intervals.

The CDT7IA model emphasizes versatility, as it is designed for various applications, including both hard and soft floor surfaces. Its dual-mode feature allows users to switch between deep cleaning and maintenance modes, providing flexibility for different cleaning needs. This model also integrates eco-friendly technologies, including energy-efficient motors that reduce power consumption without compromising performance.

Lastly, the CDT7IB model is specifically tailored for industrial and commercial use, featuring a rugged design that can tackle tough cleaning challenges. Its robust brush system provides excellent agitation on carpets, lifting dirt and grime effectively. The CDT7IB is not only powerful but also easy to maneuver, thanks to its low profile and lightweight construction.

Overall, each of the Windsor CDT7 models brings a unique set of features and technologies to the table, catering to the diverse requirements of the modern cleaning industry. Their combination of innovative design, advanced technologies, and user-focused features makes them reliable choices for professional cleaning tasks. Whether for healthcare, commercial, or industrial use, Windsor’s CDT7 series continues to uphold the brand's commitment to quality and performance in floor care.