Ventilator Minimum montagehoogte 2.3 meter

Ventilator:

◆Minimum montagehoogte 2.3 meter.

◆Installeer de ventilator zo ver mogelijk verwijderd van de plaats waar de verse lucht wordt aangevoerd om een goede doorstroming van de ruimte te verkrijgen. (bijv. tegenover een deuropening).

◆Dichtbij de bron van stoom of dampen.

◆Niet plaatsen waar temperaturen hoger dan 50o kunnen optreden, of direct boven een kookplaat, grill of een fornuis.

◆Als in de ruimte een kachel of verbrandingstoestel geplaatst is zonder gebalanceerd aanzuig/afvoerkanaal, dan dient men zich te overtuigen dat er altijd sprake is van voldoende luchttoevoer zodat de dampen niet uit dit afvoerkanaal omlaag gezogen worden wanneer de ventilator op maximale sterkte werkt. De uitblaasopening mag niet aangesloten worden op een afvoerkanaal van stook/gastoestellen. Voor de afvoer van uitlaatlucht moeten de voorschriften van alle betrokken autoriteiten in acht worden genomen.

◆Indien de ventilator in ruimtes geplaatst wordt waar de afvoerlucht chemisch korrosief kan zijn, dan wordt aanbevolen eerst technisch advies bij de importeur in te winnen.

◆Als het afvoerkanaal verticaal is gemonteerd, dan moet er een kondenswaterafvoer geplaatst worden.

◆Wanneer het afvoerkanaal horizontaal gemonteerd wordt, zorg er dan voor dat hij van de ventilator af loopt.

◆Een elekrisch apparaat in een doucheruimte of een badkamer moet zo geplaatst worden dat het niet aangeraakt kan worden door personen die gebruik maken van bad of douche.

Fan:

◆Minimum mounting height 2.3m.

◆As far away as possible from the main source of air replacement to ensure airflow across the room (eg. opposite the internal doorway).

◆Near the source of steam or fumes.

◆Not where ambient temperatures are likely to exceed 500C, or above a cooker hob or eye level grille.

◆If installing in a room containing a fuel-burning device which has a non-balanced flue, it is the installer’s responsibility to ensure that there is enough replacement air to prevent fumes being drawn down the flue, when the fan is operating on maximum extract. Exhaust air must not be discharged into a flue used for exhausting fumes from appliances supplied with energy other than electric. Requirements of all authorities concerned must be observed for exhaust air discharge.

◆When intended for use in possible chemical corrosive atmospheres, consult our Technical Services Department.

◆If any vertical ducting is installed a condensation trap must be fitted.

◆When fitting horizontal ducting, ensure it is sloping away from fan.

◆An electrical product in a shower room or bathroom must be so situated that it cannot be touched by persons making use of the bath or shower.

CMF171 specifications

The Xpelair CMF171 is an advanced extraction fan designed to enhance indoor air quality in residential and commercial spaces. This model is particularly appreciated for its blend of efficiency, reliability, and innovative technology.

One of the key features of the CMF171 is its robust design. The fan is constructed from high-quality materials, ensuring durability and longevity even in challenging environments. It is compact, making it suitable for a variety of applications, whether in a bathroom, kitchen, or utility room. The fan's slim profile allows for easy installation, whether mounted on a wall or ceiling.

In terms of performance, the CMF171 stands out due to its powerful yet quiet operation. It is equipped with a high-efficiency motor that delivers excellent airflow rates, ensuring effective extraction of moist or stale air. The fan operates at a low noise level, which is particularly important in residential applications where peace and quiet is valued.

The CMF171 also incorporates advanced technologies that enhance its functionality. It features a built-in timer that allows users to set the fan to operate for a defined period after they leave the room. This is particularly useful in bathrooms, where it helps to eliminate humidity and prevent mold growth.

Another significant characteristic of the CMF171 is its energy efficiency. Energy-efficient motors and components contribute to its low power consumption, resulting in reduced energy bills while promoting eco-friendliness. This attention to energy savings aligns well with current environmental concerns, making the CMF171 a smart choice for conscious consumers.

Additionally, the fan comes with various speed settings, allowing users to customize its operation according to their specific needs. Users can select higher speeds for areas requiring more ventilation or lower speeds when a gentle airflow is sufficient.

Furthermore, installation is simplified with the CMF171, as it includes a user-friendly manual and mounting kit. Maintenance is also straightforward, with removable components that facilitate easy cleaning.

In summary, the Xpelair CMF171 extraction fan is a versatile and efficient solution for improving indoor air quality. Its robust design, quiet operation, advanced features such as built-in timers and multiple speed settings, along with its energy-efficient technology, make it a reliable choice for a variety of environments.