Operating Temperatures & Environments

Safety Check — Upon completion of any service or repairs to thi s product, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

Lightning Storms — Unplug the controller unit (MX88/MRC88m/MRAUDIO8 x8m) during lightning storms or when unused for long periods of time.

Attachments and Accessories — Use only attachments/accessories specified by th e manufacturer.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in- stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

∙Reorient or relocate the receiving antenna.

∙Increase the separation between the equipment and receiver.

∙Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

∙Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by Xantech could void the user’s authority to operate the equipment

Caring For the MRKP2

Clean only with a dry soft cloth.

It is important to properly care for your MRKP2 Keypad. Follow these guidelines to ensure your device is preserved and protected.

∙Do not expose the MRKP2 to rain, liquids or moisture for an extended period of time.

∙Do not expose the MRKP2 to temperature extremes.

Operating Temperature: 32-104°F (0-40° C)

Humidity: 0-90%

Precautions

∙Always exercise care when operating the MRKP2 Keypad.

∙Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

∙In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power the MRKP2 off. Please report the problem to your dealer immediately.

Never attempt to disassemble the MRKP2. You will lose any product warranty on the unit.

2				3

MRKP2 specifications

The Xantech MRKP2 is a state-of-the-art multi-channel audio distribution system designed to enhance both residential and commercial audio systems. This innovative product stands out due to its impressive array of features, advanced technologies, and user-friendly characteristics that cater to the needs of audiophiles and casual listeners alike.

At the core of the MRKP2's functionality is its ability to distribute high-quality audio across multiple zones. With support for up to eight individual zones, users can enjoy synchronized audio or personalize listening experiences in different areas of the home or office. The system accommodates various audio sources, ensuring flexibility and convenience in playback options. Whether it’s streaming music, playing CDs, or connecting through various digital inputs, the MRKP2 supports it all, providing endless entertainment possibilities.

One of the key features of the Xantech MRKP2 is its compatibility with both traditional wired connections and modern wireless technologies. This dual functionality allows users to integrate the system seamlessly with existing setups. The MRKP2 also incorporates built-in power amplifiers, each capable of delivering high-quality sound without the need for additional equipment, streamlining installation and reducing clutter.

Control of the MRKP2 is intuitive, thanks to its user-friendly interface. The device can be managed via physical keypads distributed throughout the zones, or remotely using smartphone applications, enabling users to adjust settings effortlessly. Additionally, the MRKP2 is compatible with popular home automation systems, allowing for integrated control through a central hub.

The MRKP2’s audio quality is underpinned by advanced digital signal processing (DSP) technology. This ensures that sound is not only distributed efficiently but also remains true to its original quality. The system features multiple EQ settings, giving users the ability to customize their audio experience according to their preferences and room acoustics.

In terms of reliability, the Xantech MRKP2 is designed to endure. Constructed with high-quality materials and advanced engineering techniques, it promises longevity and robust performance under various conditions. Its compact design allows for easy integration into different environments without occupying excessive space.

Overall, the Xantech MRKP2 is an exemplary choice for anyone looking to upgrade their audio distribution system. Its combination of zoned audio flexibility, cutting-edge technology, and user-centric features make it a remarkable solution for modern audio needs, ensuring that every space can be turned into an immersive listening environment.