Woodstock W1410 manual 90˚ to Tabletop

Page 16

Rotate nut to rotate axle

Figure 19. Adjusting the right roller axle.

Step 3.

Once adjusted, tighten the setscrew and recheck the fence alignment. Be aware that behind each setscrew there is a plastic plug (#31) that protects the threaded axle from damage and creates a soft stop for the setscrews. Do not over-tighten the set- screw after adjustments have been made.

Step 4.

It may be necessary to adjust the axle slightly to compensate for the slight axle shift induced by tightening the setscrew. Remember, the fence should be 164" away from the miter slot measured at the back end of the fence.

Step 5.

If for some reason you are having problems adjusting the fence, please refer to the Section V, Troubleshooting on page 20.

F. 90˚ TO TABLETOP

The fence must also be adjusted so the face of the fence is square or 90° to the table surface. Use a good quality square to check. To square the fence to the table, proceed as follows:

Step 1.

Unlock the fence and loosen the setscrew (#32) on the left side. Figure 20.

Figure 20. Loosen setscrew.

Step 2.

The left roller axle is threaded into the fence body. As the roller axle is rotated, the roller will move up and down a small amount. Since the rollers are firmly held against the front rail, this has the effect of changing the angle of the fence with respect to the table top. Rotate the left roller axle (#34) while monitoring the gap between the square and the fence. Figure 21.

NOTE: The nut under the left roller could come loose during adjustment. If this occurs, lock the axle by tightening the setscrew and then tighten the nut. Use a liquid thread locker on the nut if the problem persists.

Shop Fox® Fence

-15-

Image 16
Contents Shop Fox Fence Table of Contents Section I Introduction Safety Rules for Table Saws USE a Push Stick When Cutting Narrow PiecesUnpacking Clean UPPiece Inventory Section II Installation Order of InstallationTools Required Mounting the RailsPage Page Fence installation Optional EXT. Rails Mounting the FenceOptional bracket installation Shop Fox Fence Blade GuardsTable Clearance Section III AdjustmentsTracking Setscrew stop Power link Lock HandleFence Clamping Pressure Disabling the rear clampPage Lead adjustment Shown exaggerated for illustration purposes Parallelism90˚ to Tabletop SCALE/INDICATOR Attaching the scale Shop Fox FenceFence Stop Location of shimsFine Positioning Section IV OperationsBoard Buddies Wood Facing Rails TOO Close Together Section V TroubleshootingRails TOO FAR Apart Front Clamp will not Adjust Distance between carriages Front carriageRear Clamp will not Adjust Fence does not Move SmoothlyFence will not Adjust Parallel to Blade Squaring carriage on fence Shop Fox FenceSection VI Part Documentation Shop Fox Fence REF# Description Grip Locking Handle Pivot PIN Section VII Specifications W1410 Shop FOX FenceSection Xiii Warranty
Related manuals
Manual 29 pages 52.23 Kb Manual 29 pages 29.8 Kb

W1410 specifications

Woodstock W1410 is an innovative and versatile digital weather station that has quickly garnered recognition for its reliability and advanced features. Designed for both amateur meteorologists and serious weather enthusiasts, it offers an array of functionalities that make weather tracking easier and more precise.

One of the standout features of the Woodstock W1410 is its large, easy-to-read LCD display. The screen provides a comprehensive overview of real-time weather conditions, including temperature, humidity, wind speed, and direction. Users can easily set their preferences to display the information in either metric or imperial units, which adds to the station's user-friendly nature.

The station utilizes cutting-edge technology to ensure accurate measurements. It incorporates an advanced sensor array that collects data from multiple environmental variables. This includes barometric pressure readings, rain gauge measurements, and UV index monitoring, allowing users to obtain a holistic view of their immediate weather conditions.

Wireless connectivity is another key characteristic of the W1410. The station can transmit data directly to a smartphone or tablet via a dedicated app, making it convenient for users to check weather updates remotely. This feature ensures that users can stay informed about changing weather conditions even when they are not near the station itself. Additionally, the app provides historical data storage, giving users the ability to analyze trends and patterns over time.

Moreover, the Woodstock W1410 is designed with durability in mind. Its weather-resistant casing means it can withstand various environmental conditions, making it suitable for use outdoors. This robustness ensures longevity and reliability, providing accurate data rain or shine.

Power efficiency is a noteworthy characteristic as well. The W1410 operates on batteries, with the option for solar power integration, thus reducing the overall energy consumption and making it an environmentally friendly choice.

In summary, the Woodstock W1410 digital weather station stands out due to its advanced monitoring capabilities, user-friendly interface, wireless technology, durability, and energy efficiency. Whether for personal use or educational purposes, it serves as a valuable tool for understanding and predicting weather phenomena, enriching the experience for its users.